Automation of Deburring and Finishing Works by Robot in Casting : Development of Process Planning System

The study deals with the development of a practical process planning system to remove and finish burrs existing in cast workpieces. There are many processing methods in accordance to variety of materials and cast workpiece shapes. The selection of processing methods has been made by skilled workers...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C 2002/05/25, Vol.68(669), pp.1595-1600
Hauptverfasser: SUGITA, Shinichi, TAKEUCHI, Yoshimi, YAMAMOTO, Katsumi, SUGIURA, Tetsuji
Format: Artikel
Sprache:eng ; jpn
Schlagworte:
Online-Zugang:Volltext
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page 1600
container_issue 669
container_start_page 1595
container_title TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
container_volume 68
creator SUGITA, Shinichi
TAKEUCHI, Yoshimi
YAMAMOTO, Katsumi
SUGIURA, Tetsuji
description The study deals with the development of a practical process planning system to remove and finish burrs existing in cast workpieces. There are many processing methods in accordance to variety of materials and cast workpiece shapes. The selection of processing methods has been made by skilled workers since processing methods and their knowledge are not systematically classified. In addition, as burrs on workpieces are not necessarily kept constant, and the performance of deburring and finishing tools deteriorates by abrasion of tools, they make the automation and optimization of the works extremely difficult. In terms of achieving the total automation of manufacturing system, the systematization of deburring and finishing works is indispensable, but, has not been realized due to the lack of compilation of important knowledge concerning workpieces to be deburred, deburring tools, deburring condition, etc. Thus, a knowledge database was constructed by classifying workpieces and extracting processing methods. A process planning system was developed by making use of knowledge database. As a result, it is found that the system can offer the appropriate process plan in terms of minimum cost or shortest processing time.
doi_str_mv 10.1299/kikaic.68.1595
format Article
fullrecord <record><control><sourceid>jstage_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1299_kikaic_68_1595</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>article_kikaic1979_68_669_68_669_1595_article_char_en</sourcerecordid><originalsourceid>FETCH-LOGICAL-c2045-e3b9cceb15c45d2f96ae8827e22ce15dc61612f8fbe11bff2a9cb431d7e18773</originalsourceid><addsrcrecordid>eNo9kFFLwzAUhYMoOHSvPucPtCZpkya-jelUHDh04GNJ0tstbk1G0gn7965s7Olwud93Hg5CD5TklCn1uHEb7WwuZE654ldoRKUsM1nw8hqNSCGrjBNW3qJxSs4QQlQhVCFHaD3Z96HTvQsehxY_g9nH6PwKa9_gmfMurYfrJ8RNwuaAv4IJPXYeT3Xqh8_T0fmDbdh14PuhYhGDhZTwYqu9H4jvQ-qhu0c3rd4mGJ_zDi1nL8vpWzb_fH2fTuaZZaTkGRRGWQuGclvyhrVKaJCSVcCYBcobK6igrJWtAUpN2zKtrCkL2lRAZVUVdyg_1doYUorQ1rvoOh0PNSX1sFR9WqoWsh6WOgofJ-E39XoFF1zH3tktnHGqKjUoQlxisC-UXetYgy_-ARYueT0</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Automation of Deburring and Finishing Works by Robot in Casting : Development of Process Planning System</title><source>Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals</source><source>J-STAGE (Japan Science &amp; Technology Information Aggregator, Electronic) Freely Available Titles - Japanese</source><creator>SUGITA, Shinichi ; TAKEUCHI, Yoshimi ; YAMAMOTO, Katsumi ; SUGIURA, Tetsuji</creator><creatorcontrib>SUGITA, Shinichi ; TAKEUCHI, Yoshimi ; YAMAMOTO, Katsumi ; SUGIURA, Tetsuji</creatorcontrib><description>The study deals with the development of a practical process planning system to remove and finish burrs existing in cast workpieces. There are many processing methods in accordance to variety of materials and cast workpiece shapes. The selection of processing methods has been made by skilled workers since processing methods and their knowledge are not systematically classified. In addition, as burrs on workpieces are not necessarily kept constant, and the performance of deburring and finishing tools deteriorates by abrasion of tools, they make the automation and optimization of the works extremely difficult. In terms of achieving the total automation of manufacturing system, the systematization of deburring and finishing works is indispensable, but, has not been realized due to the lack of compilation of important knowledge concerning workpieces to be deburred, deburring tools, deburring condition, etc. Thus, a knowledge database was constructed by classifying workpieces and extracting processing methods. A process planning system was developed by making use of knowledge database. As a result, it is found that the system can offer the appropriate process plan in terms of minimum cost or shortest processing time.</description><identifier>ISSN: 0387-5024</identifier><identifier>EISSN: 1884-8354</identifier><identifier>DOI: 10.1299/kikaic.68.1595</identifier><language>eng ; jpn</language><publisher>The Japan Society of Mechanical Engineers</publisher><subject>Automation ; Casting ; Deburring ; Finishing ; Knowledge Base ; Process Planning System ; Processing Method ; Robot</subject><ispartof>Transactions of the Japan Society of Mechanical Engineers Series C, 2002/05/25, Vol.68(669), pp.1595-1600</ispartof><rights>The Japan Society of Mechanical Engineers</rights><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,1881,4014,27914,27915,27916</link.rule.ids></links><search><creatorcontrib>SUGITA, Shinichi</creatorcontrib><creatorcontrib>TAKEUCHI, Yoshimi</creatorcontrib><creatorcontrib>YAMAMOTO, Katsumi</creatorcontrib><creatorcontrib>SUGIURA, Tetsuji</creatorcontrib><title>Automation of Deburring and Finishing Works by Robot in Casting : Development of Process Planning System</title><title>TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C</title><addtitle>JSMET</addtitle><description>The study deals with the development of a practical process planning system to remove and finish burrs existing in cast workpieces. There are many processing methods in accordance to variety of materials and cast workpiece shapes. The selection of processing methods has been made by skilled workers since processing methods and their knowledge are not systematically classified. In addition, as burrs on workpieces are not necessarily kept constant, and the performance of deburring and finishing tools deteriorates by abrasion of tools, they make the automation and optimization of the works extremely difficult. In terms of achieving the total automation of manufacturing system, the systematization of deburring and finishing works is indispensable, but, has not been realized due to the lack of compilation of important knowledge concerning workpieces to be deburred, deburring tools, deburring condition, etc. Thus, a knowledge database was constructed by classifying workpieces and extracting processing methods. A process planning system was developed by making use of knowledge database. As a result, it is found that the system can offer the appropriate process plan in terms of minimum cost or shortest processing time.</description><subject>Automation</subject><subject>Casting</subject><subject>Deburring</subject><subject>Finishing</subject><subject>Knowledge Base</subject><subject>Process Planning System</subject><subject>Processing Method</subject><subject>Robot</subject><issn>0387-5024</issn><issn>1884-8354</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2002</creationdate><recordtype>article</recordtype><recordid>eNo9kFFLwzAUhYMoOHSvPucPtCZpkya-jelUHDh04GNJ0tstbk1G0gn7965s7Olwud93Hg5CD5TklCn1uHEb7WwuZE654ldoRKUsM1nw8hqNSCGrjBNW3qJxSs4QQlQhVCFHaD3Z96HTvQsehxY_g9nH6PwKa9_gmfMurYfrJ8RNwuaAv4IJPXYeT3Xqh8_T0fmDbdh14PuhYhGDhZTwYqu9H4jvQ-qhu0c3rd4mGJ_zDi1nL8vpWzb_fH2fTuaZZaTkGRRGWQuGclvyhrVKaJCSVcCYBcobK6igrJWtAUpN2zKtrCkL2lRAZVUVdyg_1doYUorQ1rvoOh0PNSX1sFR9WqoWsh6WOgofJ-E39XoFF1zH3tktnHGqKjUoQlxisC-UXetYgy_-ARYueT0</recordid><startdate>2002</startdate><enddate>2002</enddate><creator>SUGITA, Shinichi</creator><creator>TAKEUCHI, Yoshimi</creator><creator>YAMAMOTO, Katsumi</creator><creator>SUGIURA, Tetsuji</creator><general>The Japan Society of Mechanical Engineers</general><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>2002</creationdate><title>Automation of Deburring and Finishing Works by Robot in Casting : Development of Process Planning System</title><author>SUGITA, Shinichi ; TAKEUCHI, Yoshimi ; YAMAMOTO, Katsumi ; SUGIURA, Tetsuji</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c2045-e3b9cceb15c45d2f96ae8827e22ce15dc61612f8fbe11bff2a9cb431d7e18773</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng ; jpn</language><creationdate>2002</creationdate><topic>Automation</topic><topic>Casting</topic><topic>Deburring</topic><topic>Finishing</topic><topic>Knowledge Base</topic><topic>Process Planning System</topic><topic>Processing Method</topic><topic>Robot</topic><toplevel>online_resources</toplevel><creatorcontrib>SUGITA, Shinichi</creatorcontrib><creatorcontrib>TAKEUCHI, Yoshimi</creatorcontrib><creatorcontrib>YAMAMOTO, Katsumi</creatorcontrib><creatorcontrib>SUGIURA, Tetsuji</creatorcontrib><collection>CrossRef</collection><jtitle>TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>SUGITA, Shinichi</au><au>TAKEUCHI, Yoshimi</au><au>YAMAMOTO, Katsumi</au><au>SUGIURA, Tetsuji</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Automation of Deburring and Finishing Works by Robot in Casting : Development of Process Planning System</atitle><jtitle>TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C</jtitle><addtitle>JSMET</addtitle><date>2002</date><risdate>2002</risdate><volume>68</volume><issue>669</issue><spage>1595</spage><epage>1600</epage><pages>1595-1600</pages><issn>0387-5024</issn><eissn>1884-8354</eissn><abstract>The study deals with the development of a practical process planning system to remove and finish burrs existing in cast workpieces. There are many processing methods in accordance to variety of materials and cast workpiece shapes. The selection of processing methods has been made by skilled workers since processing methods and their knowledge are not systematically classified. In addition, as burrs on workpieces are not necessarily kept constant, and the performance of deburring and finishing tools deteriorates by abrasion of tools, they make the automation and optimization of the works extremely difficult. In terms of achieving the total automation of manufacturing system, the systematization of deburring and finishing works is indispensable, but, has not been realized due to the lack of compilation of important knowledge concerning workpieces to be deburred, deburring tools, deburring condition, etc. Thus, a knowledge database was constructed by classifying workpieces and extracting processing methods. A process planning system was developed by making use of knowledge database. As a result, it is found that the system can offer the appropriate process plan in terms of minimum cost or shortest processing time.</abstract><pub>The Japan Society of Mechanical Engineers</pub><doi>10.1299/kikaic.68.1595</doi><tpages>6</tpages><oa>free_for_read</oa></addata></record>
fulltext fulltext
identifier ISSN: 0387-5024
ispartof Transactions of the Japan Society of Mechanical Engineers Series C, 2002/05/25, Vol.68(669), pp.1595-1600
issn 0387-5024
1884-8354
language eng ; jpn
recordid cdi_crossref_primary_10_1299_kikaic_68_1595
source Elektronische Zeitschriftenbibliothek - Frei zugängliche E-Journals; J-STAGE (Japan Science & Technology Information Aggregator, Electronic) Freely Available Titles - Japanese
subjects Automation
Casting
Deburring
Finishing
Knowledge Base
Process Planning System
Processing Method
Robot
title Automation of Deburring and Finishing Works by Robot in Casting : Development of Process Planning System
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-15T06%3A08%3A52IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-jstage_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Automation%20of%20Deburring%20and%20Finishing%20Works%20by%20Robot%20in%20Casting%20:%20Development%20of%20Process%20Planning%20System&rft.jtitle=TRANSACTIONS%20OF%20THE%20JAPAN%20SOCIETY%20OF%20MECHANICAL%20ENGINEERS%20Series%20C&rft.au=SUGITA,%20Shinichi&rft.date=2002&rft.volume=68&rft.issue=669&rft.spage=1595&rft.epage=1600&rft.pages=1595-1600&rft.issn=0387-5024&rft.eissn=1884-8354&rft_id=info:doi/10.1299/kikaic.68.1595&rft_dat=%3Cjstage_cross%3Earticle_kikaic1979_68_669_68_669_1595_article_char_en%3C/jstage_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true