Determination of the Mechanical Properties of Composite Materials by Tensile Tests. Part II: Strength Properties
A new data evaluation scheme is presented for the measurement of tensile strengths at different angles. The method is applicable for all composite materials that follow the Tsai-Wu failure criterion. It is general in the sense that it can be used for both tri-clinic and monoclinic or higher symmetry...
Gespeichert in:
| Veröffentlicht in: | Journal of composite materials 1998-01, Vol.32 (2), p.102-122 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 122 |
|---|---|
| container_issue | 2 |
| container_start_page | 102 |
| container_title | Journal of composite materials |
| container_volume | 32 |
| creator | Gommers, B. Verpoest, I. Van Houtte, P. |
| description | A new data evaluation scheme is presented for the measurement of tensile strengths at different angles. The method is applicable for all composite materials that follow the Tsai-Wu failure criterion. It is general in the sense that it can be used for both tri-clinic and monoclinic or higher symmetry materials. With this method, tensile strength data at different angles can be made consistent. It is also shown that the shear strength can be determined by tensile tests if in addition a biaxial test and two or three compression tests (for respectively monoclinic or higher symmetry and triclinic materials) are performed. As an example, the method is applied to a glass/epoxy woven fabric composite and two types of knitted fabric composites. The best test angles to determine the strength parameters for these materials happen to be the same angles that were optimal for the determination of the elastic properties. |
| doi_str_mv | 10.1177/002199839803200201 |
| format | Article |
| fullrecord | <record><control><sourceid>sage_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1177_002199839803200201</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sage_id>10.1177_002199839803200201</sage_id><sourcerecordid>10.1177_002199839803200201</sourcerecordid><originalsourceid>FETCH-LOGICAL-c314t-e81519dee75d3fad4b1d3b5bece4b210606044bc14a20a435d4947f31d6b8ffb3</originalsourceid><addsrcrecordid>eNp9kE1LAzEQhoMoWKt_wFMOXrfNbLLdXW9SvwoVC1bwtiS7kzalzS5JPPTfm2VFBEHmMAzzPC_MEHINbAKQ51PGUijLgpcF42kcGJyQEWScJXnJP07JqAeSnjgnF97vGGM5iNmIdPcY0B2MlcG0lraahi3SF6y30ppa7unKtR26YND3y3l76FpvQkRk9Izce6qOdI3Wmz3G7oOf0JV0gS4Wt_QtOLSbsP2VcknOdLTw6ruPyfvjw3r-nCxfnxbzu2VScxAhwQIyKBvEPGu4lo1Q0HCVKaxRqBTYLJYQqgYhUyYFzxpRilxzaGaq0FrxMUmH3Nq13jvUVefMQbpjBazqf1b9_VmUbgapkz4er520tfE_ZgoZK6CM2HTAvNxgtWs_nY2n_Bf8BYCmejs</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Determination of the Mechanical Properties of Composite Materials by Tensile Tests. Part II: Strength Properties</title><source>SAGE Complete A-Z List</source><creator>Gommers, B. ; Verpoest, I. ; Van Houtte, P.</creator><creatorcontrib>Gommers, B. ; Verpoest, I. ; Van Houtte, P.</creatorcontrib><description>A new data evaluation scheme is presented for the measurement of tensile strengths at different angles. The method is applicable for all composite materials that follow the Tsai-Wu failure criterion. It is general in the sense that it can be used for both tri-clinic and monoclinic or higher symmetry materials. With this method, tensile strength data at different angles can be made consistent. It is also shown that the shear strength can be determined by tensile tests if in addition a biaxial test and two or three compression tests (for respectively monoclinic or higher symmetry and triclinic materials) are performed. As an example, the method is applied to a glass/epoxy woven fabric composite and two types of knitted fabric composites. The best test angles to determine the strength parameters for these materials happen to be the same angles that were optimal for the determination of the elastic properties.</description><identifier>ISSN: 0021-9983</identifier><identifier>EISSN: 1530-793X</identifier><identifier>DOI: 10.1177/002199839803200201</identifier><identifier>CODEN: JCOMBI</identifier><language>eng</language><publisher>Thousand Oaks, CA: SAGE Publications</publisher><subject>Applied sciences ; Exact sciences and technology ; Fundamental areas of phenomenology (including applications) ; Measurement and testing methods ; Measurement methods and techniques in continuum mechanics of solids ; Physics ; Polymer industry, paints, wood ; Properties and testing ; Solid mechanics ; Structural and continuum mechanics ; Technology of polymers ; Testing and control</subject><ispartof>Journal of composite materials, 1998-01, Vol.32 (2), p.102-122</ispartof><rights>1998 INIST-CNRS</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c314t-e81519dee75d3fad4b1d3b5bece4b210606044bc14a20a435d4947f31d6b8ffb3</citedby><cites>FETCH-LOGICAL-c314t-e81519dee75d3fad4b1d3b5bece4b210606044bc14a20a435d4947f31d6b8ffb3</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://journals.sagepub.com/doi/pdf/10.1177/002199839803200201$$EPDF$$P50$$Gsage$$H</linktopdf><linktohtml>$$Uhttps://journals.sagepub.com/doi/10.1177/002199839803200201$$EHTML$$P50$$Gsage$$H</linktohtml><link.rule.ids>314,777,781,4010,21800,27904,27905,27906,43602,43603</link.rule.ids><backlink>$$Uhttp://pascal-francis.inist.fr/vibad/index.php?action=getRecordDetail&idt=2150819$$DView record in Pascal Francis$$Hfree_for_read</backlink></links><search><creatorcontrib>Gommers, B.</creatorcontrib><creatorcontrib>Verpoest, I.</creatorcontrib><creatorcontrib>Van Houtte, P.</creatorcontrib><title>Determination of the Mechanical Properties of Composite Materials by Tensile Tests. Part II: Strength Properties</title><title>Journal of composite materials</title><description>A new data evaluation scheme is presented for the measurement of tensile strengths at different angles. The method is applicable for all composite materials that follow the Tsai-Wu failure criterion. It is general in the sense that it can be used for both tri-clinic and monoclinic or higher symmetry materials. With this method, tensile strength data at different angles can be made consistent. It is also shown that the shear strength can be determined by tensile tests if in addition a biaxial test and two or three compression tests (for respectively monoclinic or higher symmetry and triclinic materials) are performed. As an example, the method is applied to a glass/epoxy woven fabric composite and two types of knitted fabric composites. The best test angles to determine the strength parameters for these materials happen to be the same angles that were optimal for the determination of the elastic properties.</description><subject>Applied sciences</subject><subject>Exact sciences and technology</subject><subject>Fundamental areas of phenomenology (including applications)</subject><subject>Measurement and testing methods</subject><subject>Measurement methods and techniques in continuum mechanics of solids</subject><subject>Physics</subject><subject>Polymer industry, paints, wood</subject><subject>Properties and testing</subject><subject>Solid mechanics</subject><subject>Structural and continuum mechanics</subject><subject>Technology of polymers</subject><subject>Testing and control</subject><issn>0021-9983</issn><issn>1530-793X</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>1998</creationdate><recordtype>article</recordtype><recordid>eNp9kE1LAzEQhoMoWKt_wFMOXrfNbLLdXW9SvwoVC1bwtiS7kzalzS5JPPTfm2VFBEHmMAzzPC_MEHINbAKQ51PGUijLgpcF42kcGJyQEWScJXnJP07JqAeSnjgnF97vGGM5iNmIdPcY0B2MlcG0lraahi3SF6y30ppa7unKtR26YND3y3l76FpvQkRk9Izce6qOdI3Wmz3G7oOf0JV0gS4Wt_QtOLSbsP2VcknOdLTw6ruPyfvjw3r-nCxfnxbzu2VScxAhwQIyKBvEPGu4lo1Q0HCVKaxRqBTYLJYQqgYhUyYFzxpRilxzaGaq0FrxMUmH3Nq13jvUVefMQbpjBazqf1b9_VmUbgapkz4er520tfE_ZgoZK6CM2HTAvNxgtWs_nY2n_Bf8BYCmejs</recordid><startdate>199801</startdate><enddate>199801</enddate><creator>Gommers, B.</creator><creator>Verpoest, I.</creator><creator>Van Houtte, P.</creator><general>SAGE Publications</general><general>Technomic</general><scope>IQODW</scope><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>199801</creationdate><title>Determination of the Mechanical Properties of Composite Materials by Tensile Tests. Part II: Strength Properties</title><author>Gommers, B. ; Verpoest, I. ; Van Houtte, P.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c314t-e81519dee75d3fad4b1d3b5bece4b210606044bc14a20a435d4947f31d6b8ffb3</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>1998</creationdate><topic>Applied sciences</topic><topic>Exact sciences and technology</topic><topic>Fundamental areas of phenomenology (including applications)</topic><topic>Measurement and testing methods</topic><topic>Measurement methods and techniques in continuum mechanics of solids</topic><topic>Physics</topic><topic>Polymer industry, paints, wood</topic><topic>Properties and testing</topic><topic>Solid mechanics</topic><topic>Structural and continuum mechanics</topic><topic>Technology of polymers</topic><topic>Testing and control</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Gommers, B.</creatorcontrib><creatorcontrib>Verpoest, I.</creatorcontrib><creatorcontrib>Van Houtte, P.</creatorcontrib><collection>Pascal-Francis</collection><collection>CrossRef</collection><jtitle>Journal of composite materials</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Gommers, B.</au><au>Verpoest, I.</au><au>Van Houtte, P.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Determination of the Mechanical Properties of Composite Materials by Tensile Tests. Part II: Strength Properties</atitle><jtitle>Journal of composite materials</jtitle><date>1998-01</date><risdate>1998</risdate><volume>32</volume><issue>2</issue><spage>102</spage><epage>122</epage><pages>102-122</pages><issn>0021-9983</issn><eissn>1530-793X</eissn><coden>JCOMBI</coden><abstract>A new data evaluation scheme is presented for the measurement of tensile strengths at different angles. The method is applicable for all composite materials that follow the Tsai-Wu failure criterion. It is general in the sense that it can be used for both tri-clinic and monoclinic or higher symmetry materials. With this method, tensile strength data at different angles can be made consistent. It is also shown that the shear strength can be determined by tensile tests if in addition a biaxial test and two or three compression tests (for respectively monoclinic or higher symmetry and triclinic materials) are performed. As an example, the method is applied to a glass/epoxy woven fabric composite and two types of knitted fabric composites. The best test angles to determine the strength parameters for these materials happen to be the same angles that were optimal for the determination of the elastic properties.</abstract><cop>Thousand Oaks, CA</cop><pub>SAGE Publications</pub><doi>10.1177/002199839803200201</doi><tpages>21</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 0021-9983 |
| ispartof | Journal of composite materials, 1998-01, Vol.32 (2), p.102-122 |
| issn | 0021-9983 1530-793X |
| language | eng |
| recordid | cdi_crossref_primary_10_1177_002199839803200201 |
| source | SAGE Complete A-Z List |
| subjects | Applied sciences Exact sciences and technology Fundamental areas of phenomenology (including applications) Measurement and testing methods Measurement methods and techniques in continuum mechanics of solids Physics Polymer industry, paints, wood Properties and testing Solid mechanics Structural and continuum mechanics Technology of polymers Testing and control |
| title | Determination of the Mechanical Properties of Composite Materials by Tensile Tests. Part II: Strength Properties |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-20T11%3A53%3A45IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-sage_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Determination%20of%20the%20Mechanical%20Properties%20of%20Composite%20Materials%20by%20Tensile%20Tests.%20Part%20II:%20Strength%20Properties&rft.jtitle=Journal%20of%20composite%20materials&rft.au=Gommers,%20B.&rft.date=1998-01&rft.volume=32&rft.issue=2&rft.spage=102&rft.epage=122&rft.pages=102-122&rft.issn=0021-9983&rft.eissn=1530-793X&rft.coden=JCOMBI&rft_id=info:doi/10.1177/002199839803200201&rft_dat=%3Csage_cross%3E10.1177_002199839803200201%3C/sage_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_sage_id=10.1177_002199839803200201&rfr_iscdi=true |