K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses
Pure mode I and mode II fracture toughness of asphalt mixture was investigated both experimentally and theoretically using vertical edge crack semicircular bend (SCB) specimen with symmetric and asymmetric bottom loading spans. The thickness of SCB specimen was considered in the range from 30 to 70...
Gespeichert in:
| Veröffentlicht in: | Fatigue & fracture of engineering materials & structures 2021-03, Vol.44 (3), p.832-846 |
|---|---|
| Hauptverfasser: | , , , , , |
| Format: | Artikel |
| Sprache: | eng |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 846 |
|---|---|
| container_issue | 3 |
| container_start_page | 832 |
| container_title | Fatigue & fracture of engineering materials & structures |
| container_volume | 44 |
| creator | Xiongzhou, Yuan Yuze, Tian Qinglin, Liu Song, Liu Qianwen, Dou Aliha, M.R.M. |
| description | Pure mode I and mode II fracture toughness of asphalt mixture was investigated both experimentally and theoretically using vertical edge crack semicircular bend (SCB) specimen with symmetric and asymmetric bottom loading spans. The thickness of SCB specimen was considered in the range from 30 to 70 mm, and the fracture toughness tests were performed at three subzero temperatures (−5°C, −15°C and −25°C). The results showed that
K
Ic
and
K
IIc
are increased by reducing the test temperature. The thickness had no sound effect on the fracture toughness, but the thickness of 50 mm was more suitable for fracture study on this material. The fracture load of mode II specimen was significantly greater than the mode I fracture load at the same testing condition. The fracture toughness ratio (
K
IIc
/
K
Ic
) that varies in the range between 1 and 1.4 was predicted theoretically using three well‐known stress/strain‐based fracture criteria. |
| doi_str_mv | 10.1111/ffe.13398 |
| format | Article |
| fullrecord | <record><control><sourceid>crossref</sourceid><recordid>TN_cdi_crossref_primary_10_1111_ffe_13398</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>10_1111_ffe_13398</sourcerecordid><originalsourceid>FETCH-LOGICAL-c159t-69c3e5351283d05ebfa1fc020d44c4de8a2ba936858f828dad55e7cc074186c03</originalsourceid><addsrcrecordid>eNotUE1PwzAMjRBIjMGBf-Arh0LSNG3KDU0DJiZxAYlblSUuDfRjSlJt-1P8RtKBL35-9nuyTcg1o7csxl1d4y3jvJQnZMaynCZpXopTMpOFyJNCyI9zcuH9F6UszzifkZ8XWGlQvYEIIupQ-dFhh32AenDQDAE6uwflt41qjzjEvgcVoB12ELDbolMTdw_LfcR20qr26BkaHBwGq2Ptw2gOMHrbf048eOystk6PrXKwwTjtt6gnNexsaMDYeIub9giN1d89eo_-kpzVqvV49Z_n5P1x-bZ4TtavT6vFwzrRTJQhyUvNUXDBUskNFbipFas1TanJMp0ZlCrdqJLnUshaptIoIwQWWtMiYzLXlM_JzZ-vdoP3DutqGw9T7lAxWk2PruJy1fHR_BdCnXWa</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses</title><source>Wiley Online Library Journals Frontfile Complete</source><creator>Xiongzhou, Yuan ; Yuze, Tian ; Qinglin, Liu ; Song, Liu ; Qianwen, Dou ; Aliha, M.R.M.</creator><creatorcontrib>Xiongzhou, Yuan ; Yuze, Tian ; Qinglin, Liu ; Song, Liu ; Qianwen, Dou ; Aliha, M.R.M.</creatorcontrib><description>Pure mode I and mode II fracture toughness of asphalt mixture was investigated both experimentally and theoretically using vertical edge crack semicircular bend (SCB) specimen with symmetric and asymmetric bottom loading spans. The thickness of SCB specimen was considered in the range from 30 to 70 mm, and the fracture toughness tests were performed at three subzero temperatures (−5°C, −15°C and −25°C). The results showed that
K
Ic
and
K
IIc
are increased by reducing the test temperature. The thickness had no sound effect on the fracture toughness, but the thickness of 50 mm was more suitable for fracture study on this material. The fracture load of mode II specimen was significantly greater than the mode I fracture load at the same testing condition. The fracture toughness ratio (
K
IIc
/
K
Ic
) that varies in the range between 1 and 1.4 was predicted theoretically using three well‐known stress/strain‐based fracture criteria.</description><identifier>ISSN: 8756-758X</identifier><identifier>EISSN: 1460-2695</identifier><identifier>DOI: 10.1111/ffe.13398</identifier><language>eng</language><ispartof>Fatigue & fracture of engineering materials & structures, 2021-03, Vol.44 (3), p.832-846</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c159t-69c3e5351283d05ebfa1fc020d44c4de8a2ba936858f828dad55e7cc074186c03</citedby><cites>FETCH-LOGICAL-c159t-69c3e5351283d05ebfa1fc020d44c4de8a2ba936858f828dad55e7cc074186c03</cites><orcidid>0000-0001-9451-0949</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,776,780,27903,27904</link.rule.ids></links><search><creatorcontrib>Xiongzhou, Yuan</creatorcontrib><creatorcontrib>Yuze, Tian</creatorcontrib><creatorcontrib>Qinglin, Liu</creatorcontrib><creatorcontrib>Song, Liu</creatorcontrib><creatorcontrib>Qianwen, Dou</creatorcontrib><creatorcontrib>Aliha, M.R.M.</creatorcontrib><title>K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses</title><title>Fatigue & fracture of engineering materials & structures</title><description>Pure mode I and mode II fracture toughness of asphalt mixture was investigated both experimentally and theoretically using vertical edge crack semicircular bend (SCB) specimen with symmetric and asymmetric bottom loading spans. The thickness of SCB specimen was considered in the range from 30 to 70 mm, and the fracture toughness tests were performed at three subzero temperatures (−5°C, −15°C and −25°C). The results showed that
K
Ic
and
K
IIc
are increased by reducing the test temperature. The thickness had no sound effect on the fracture toughness, but the thickness of 50 mm was more suitable for fracture study on this material. The fracture load of mode II specimen was significantly greater than the mode I fracture load at the same testing condition. The fracture toughness ratio (
K
IIc
/
K
Ic
) that varies in the range between 1 and 1.4 was predicted theoretically using three well‐known stress/strain‐based fracture criteria.</description><issn>8756-758X</issn><issn>1460-2695</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2021</creationdate><recordtype>article</recordtype><recordid>eNotUE1PwzAMjRBIjMGBf-Arh0LSNG3KDU0DJiZxAYlblSUuDfRjSlJt-1P8RtKBL35-9nuyTcg1o7csxl1d4y3jvJQnZMaynCZpXopTMpOFyJNCyI9zcuH9F6UszzifkZ8XWGlQvYEIIupQ-dFhh32AenDQDAE6uwflt41qjzjEvgcVoB12ELDbolMTdw_LfcR20qr26BkaHBwGq2Ptw2gOMHrbf048eOystk6PrXKwwTjtt6gnNexsaMDYeIub9giN1d89eo_-kpzVqvV49Z_n5P1x-bZ4TtavT6vFwzrRTJQhyUvNUXDBUskNFbipFas1TanJMp0ZlCrdqJLnUshaptIoIwQWWtMiYzLXlM_JzZ-vdoP3DutqGw9T7lAxWk2PruJy1fHR_BdCnXWa</recordid><startdate>202103</startdate><enddate>202103</enddate><creator>Xiongzhou, Yuan</creator><creator>Yuze, Tian</creator><creator>Qinglin, Liu</creator><creator>Song, Liu</creator><creator>Qianwen, Dou</creator><creator>Aliha, M.R.M.</creator><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0001-9451-0949</orcidid></search><sort><creationdate>202103</creationdate><title>K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses</title><author>Xiongzhou, Yuan ; Yuze, Tian ; Qinglin, Liu ; Song, Liu ; Qianwen, Dou ; Aliha, M.R.M.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c159t-69c3e5351283d05ebfa1fc020d44c4de8a2ba936858f828dad55e7cc074186c03</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2021</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Xiongzhou, Yuan</creatorcontrib><creatorcontrib>Yuze, Tian</creatorcontrib><creatorcontrib>Qinglin, Liu</creatorcontrib><creatorcontrib>Song, Liu</creatorcontrib><creatorcontrib>Qianwen, Dou</creatorcontrib><creatorcontrib>Aliha, M.R.M.</creatorcontrib><collection>CrossRef</collection><jtitle>Fatigue & fracture of engineering materials & structures</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Xiongzhou, Yuan</au><au>Yuze, Tian</au><au>Qinglin, Liu</au><au>Song, Liu</au><au>Qianwen, Dou</au><au>Aliha, M.R.M.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses</atitle><jtitle>Fatigue & fracture of engineering materials & structures</jtitle><date>2021-03</date><risdate>2021</risdate><volume>44</volume><issue>3</issue><spage>832</spage><epage>846</epage><pages>832-846</pages><issn>8756-758X</issn><eissn>1460-2695</eissn><abstract>Pure mode I and mode II fracture toughness of asphalt mixture was investigated both experimentally and theoretically using vertical edge crack semicircular bend (SCB) specimen with symmetric and asymmetric bottom loading spans. The thickness of SCB specimen was considered in the range from 30 to 70 mm, and the fracture toughness tests were performed at three subzero temperatures (−5°C, −15°C and −25°C). The results showed that
K
Ic
and
K
IIc
are increased by reducing the test temperature. The thickness had no sound effect on the fracture toughness, but the thickness of 50 mm was more suitable for fracture study on this material. The fracture load of mode II specimen was significantly greater than the mode I fracture load at the same testing condition. The fracture toughness ratio (
K
IIc
/
K
Ic
) that varies in the range between 1 and 1.4 was predicted theoretically using three well‐known stress/strain‐based fracture criteria.</abstract><doi>10.1111/ffe.13398</doi><tpages>15</tpages><orcidid>https://orcid.org/0000-0001-9451-0949</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 8756-758X |
| ispartof | Fatigue & fracture of engineering materials & structures, 2021-03, Vol.44 (3), p.832-846 |
| issn | 8756-758X 1460-2695 |
| language | eng |
| recordid | cdi_crossref_primary_10_1111_ffe_13398 |
| source | Wiley Online Library Journals Frontfile Complete |
| title | K Ic and K IIc measurement for hot mix asphalt mixtures at low temperature: Experimental and theoretical study using the semicircular bend specimen with different thicknesses |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-23T10%3A56%3A05IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-crossref&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=K%20Ic%20and%20K%20IIc%20measurement%20for%20hot%20mix%20asphalt%20mixtures%20at%20low%20temperature:%20Experimental%20and%20theoretical%20study%20using%20the%20semicircular%20bend%20specimen%20with%20different%20thicknesses&rft.jtitle=Fatigue%20&%20fracture%20of%20engineering%20materials%20&%20structures&rft.au=Xiongzhou,%20Yuan&rft.date=2021-03&rft.volume=44&rft.issue=3&rft.spage=832&rft.epage=846&rft.pages=832-846&rft.issn=8756-758X&rft.eissn=1460-2695&rft_id=info:doi/10.1111/ffe.13398&rft_dat=%3Ccrossref%3E10_1111_ffe_13398%3C/crossref%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |