Detailed Derivation and Experimental Validation of a Method for Obtaining Load Conditions for Salient Pole Synchronous Machine Quadrature Axis Parameters Determination
In this paper, a method to determine load conditions under which the armature current of a salient pole synchronous machine is on the q -axis is described. The proposed method allows the determination of a locus in the P-Q space in which the armature current is completely on the q -axis. The derivat...
Gespeichert in:
| Veröffentlicht in: | IEEE transactions on industrial electronics (1982) 2019-07, Vol.66 (7), p.5049-5056 |
|---|---|
| Hauptverfasser: | , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext bestellen |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 5056 |
|---|---|
| container_issue | 7 |
| container_start_page | 5049 |
| container_title | IEEE transactions on industrial electronics (1982) |
| container_volume | 66 |
| creator | Giesbrecht, Mateus Meneses, Luis Alfredo Esteves |
| description | In this paper, a method to determine load conditions under which the armature current of a salient pole synchronous machine is on the q -axis is described. The proposed method allows the determination of a locus in the P-Q space in which the armature current is completely on the q -axis. The derivation of these conditions simplifies the determination of the machine q -axis parameters during load rejection tests, since it eliminates the necessity for trial and error procedures or power angle estimation. The method was tested in a 100 MVA, 13.8 kV, 60 Hz, 40 poles salient pole synchronous machine installed in a hydro power plant. Tests results show that loads calculated with the proposed method are in fact points where the armature current is on the q -axis. |
| doi_str_mv | 10.1109/TIE.2018.2866096 |
| format | Article |
| fullrecord | <record><control><sourceid>crossref_RIE</sourceid><recordid>TN_cdi_crossref_primary_10_1109_TIE_2018_2866096</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><ieee_id>8450640</ieee_id><sourcerecordid>10_1109_TIE_2018_2866096</sourcerecordid><originalsourceid>FETCH-LOGICAL-c263t-b88cc63f426ff6b7c552ae4b8a7340fc46c5770dac08c66c3e890237961989643</originalsourceid><addsrcrecordid>eNo9kMlOwzAQhi0EEqVwR-LiF0gZJ47jHFEpi9QKEMs1mjoTapTayE4RPBGviUsRp5HmX2b0MXYqYCIE1OdPt7NJDkJPcq0U1GqPjURZVlldS73PRpBXOgOQ6pAdxfgGIGQpyhH7vqQBbU8tv6RgP3Cw3nF0LZ99vqfFmtyAPX_B3rY7zXcc-YKGlW955wO_W6a8s-6Vzz22fOpda7fG-Ks-pmCq4Pe-J_745cwqeOc3kS_QrKwj_rDBNuCwCcQvPm3k9xhwTQOFmB5KY23d791jdtBhH-nkb47Z89XsaXqTze-ub6cX88zkqhiypdbGqKKTueo6taxMWeZIcqmxKiR0RipTVhW0aEAbpUxBuoa8qGolal0rWYwZ7HpN8DEG6pr3RAHDVyOg2YJuEuhmC7r5A50iZ7uIJaJ_u5YlKAnFD6JbfUs</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Detailed Derivation and Experimental Validation of a Method for Obtaining Load Conditions for Salient Pole Synchronous Machine Quadrature Axis Parameters Determination</title><source>IEEE Electronic Library (IEL)</source><creator>Giesbrecht, Mateus ; Meneses, Luis Alfredo Esteves</creator><creatorcontrib>Giesbrecht, Mateus ; Meneses, Luis Alfredo Esteves</creatorcontrib><description>In this paper, a method to determine load conditions under which the armature current of a salient pole synchronous machine is on the q -axis is described. The proposed method allows the determination of a locus in the <inline-formula><tex-math notation="LaTeX">P-Q</tex-math></inline-formula> space in which the armature current is completely on the q -axis. The derivation of these conditions simplifies the determination of the machine q -axis parameters during load rejection tests, since it eliminates the necessity for trial and error procedures or power angle estimation. The method was tested in a 100 MVA, 13.8 kV, 60 Hz, 40 poles salient pole synchronous machine installed in a hydro power plant. Tests results show that loads calculated with the proposed method are in fact points where the armature current is on the q -axis.</description><identifier>ISSN: 0278-0046</identifier><identifier>EISSN: 1557-9948</identifier><identifier>DOI: 10.1109/TIE.2018.2866096</identifier><identifier>CODEN: ITIED6</identifier><language>eng</language><publisher>IEEE</publisher><subject>Hydroelectric generators ; Integrated circuit modeling ; Load modeling ; Mathematical model ; parameter estimation ; Power generation ; Rotors ; Synchronous machines ; Transient analysis</subject><ispartof>IEEE transactions on industrial electronics (1982), 2019-07, Vol.66 (7), p.5049-5056</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c263t-b88cc63f426ff6b7c552ae4b8a7340fc46c5770dac08c66c3e890237961989643</citedby><cites>FETCH-LOGICAL-c263t-b88cc63f426ff6b7c552ae4b8a7340fc46c5770dac08c66c3e890237961989643</cites><orcidid>0000-0002-9952-5274 ; 0000-0002-2283-1054</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://ieeexplore.ieee.org/document/8450640$$EHTML$$P50$$Gieee$$H</linktohtml><link.rule.ids>314,776,780,792,27901,27902,54733</link.rule.ids><linktorsrc>$$Uhttps://ieeexplore.ieee.org/document/8450640$$EView_record_in_IEEE$$FView_record_in_$$GIEEE</linktorsrc></links><search><creatorcontrib>Giesbrecht, Mateus</creatorcontrib><creatorcontrib>Meneses, Luis Alfredo Esteves</creatorcontrib><title>Detailed Derivation and Experimental Validation of a Method for Obtaining Load Conditions for Salient Pole Synchronous Machine Quadrature Axis Parameters Determination</title><title>IEEE transactions on industrial electronics (1982)</title><addtitle>TIE</addtitle><description>In this paper, a method to determine load conditions under which the armature current of a salient pole synchronous machine is on the q -axis is described. The proposed method allows the determination of a locus in the <inline-formula><tex-math notation="LaTeX">P-Q</tex-math></inline-formula> space in which the armature current is completely on the q -axis. The derivation of these conditions simplifies the determination of the machine q -axis parameters during load rejection tests, since it eliminates the necessity for trial and error procedures or power angle estimation. The method was tested in a 100 MVA, 13.8 kV, 60 Hz, 40 poles salient pole synchronous machine installed in a hydro power plant. Tests results show that loads calculated with the proposed method are in fact points where the armature current is on the q -axis.</description><subject>Hydroelectric generators</subject><subject>Integrated circuit modeling</subject><subject>Load modeling</subject><subject>Mathematical model</subject><subject>parameter estimation</subject><subject>Power generation</subject><subject>Rotors</subject><subject>Synchronous machines</subject><subject>Transient analysis</subject><issn>0278-0046</issn><issn>1557-9948</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2019</creationdate><recordtype>article</recordtype><sourceid>RIE</sourceid><recordid>eNo9kMlOwzAQhi0EEqVwR-LiF0gZJ47jHFEpi9QKEMs1mjoTapTayE4RPBGviUsRp5HmX2b0MXYqYCIE1OdPt7NJDkJPcq0U1GqPjURZVlldS73PRpBXOgOQ6pAdxfgGIGQpyhH7vqQBbU8tv6RgP3Cw3nF0LZ99vqfFmtyAPX_B3rY7zXcc-YKGlW955wO_W6a8s-6Vzz22fOpda7fG-Ks-pmCq4Pe-J_745cwqeOc3kS_QrKwj_rDBNuCwCcQvPm3k9xhwTQOFmB5KY23d791jdtBhH-nkb47Z89XsaXqTze-ub6cX88zkqhiypdbGqKKTueo6taxMWeZIcqmxKiR0RipTVhW0aEAbpUxBuoa8qGolal0rWYwZ7HpN8DEG6pr3RAHDVyOg2YJuEuhmC7r5A50iZ7uIJaJ_u5YlKAnFD6JbfUs</recordid><startdate>201907</startdate><enddate>201907</enddate><creator>Giesbrecht, Mateus</creator><creator>Meneses, Luis Alfredo Esteves</creator><general>IEEE</general><scope>97E</scope><scope>RIA</scope><scope>RIE</scope><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0002-9952-5274</orcidid><orcidid>https://orcid.org/0000-0002-2283-1054</orcidid></search><sort><creationdate>201907</creationdate><title>Detailed Derivation and Experimental Validation of a Method for Obtaining Load Conditions for Salient Pole Synchronous Machine Quadrature Axis Parameters Determination</title><author>Giesbrecht, Mateus ; Meneses, Luis Alfredo Esteves</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c263t-b88cc63f426ff6b7c552ae4b8a7340fc46c5770dac08c66c3e890237961989643</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2019</creationdate><topic>Hydroelectric generators</topic><topic>Integrated circuit modeling</topic><topic>Load modeling</topic><topic>Mathematical model</topic><topic>parameter estimation</topic><topic>Power generation</topic><topic>Rotors</topic><topic>Synchronous machines</topic><topic>Transient analysis</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Giesbrecht, Mateus</creatorcontrib><creatorcontrib>Meneses, Luis Alfredo Esteves</creatorcontrib><collection>IEEE All-Society Periodicals Package (ASPP) 2005-present</collection><collection>IEEE All-Society Periodicals Package (ASPP) 1998-Present</collection><collection>IEEE Electronic Library (IEL)</collection><collection>CrossRef</collection><jtitle>IEEE transactions on industrial electronics (1982)</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Giesbrecht, Mateus</au><au>Meneses, Luis Alfredo Esteves</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Detailed Derivation and Experimental Validation of a Method for Obtaining Load Conditions for Salient Pole Synchronous Machine Quadrature Axis Parameters Determination</atitle><jtitle>IEEE transactions on industrial electronics (1982)</jtitle><stitle>TIE</stitle><date>2019-07</date><risdate>2019</risdate><volume>66</volume><issue>7</issue><spage>5049</spage><epage>5056</epage><pages>5049-5056</pages><issn>0278-0046</issn><eissn>1557-9948</eissn><coden>ITIED6</coden><abstract>In this paper, a method to determine load conditions under which the armature current of a salient pole synchronous machine is on the q -axis is described. The proposed method allows the determination of a locus in the <inline-formula><tex-math notation="LaTeX">P-Q</tex-math></inline-formula> space in which the armature current is completely on the q -axis. The derivation of these conditions simplifies the determination of the machine q -axis parameters during load rejection tests, since it eliminates the necessity for trial and error procedures or power angle estimation. The method was tested in a 100 MVA, 13.8 kV, 60 Hz, 40 poles salient pole synchronous machine installed in a hydro power plant. Tests results show that loads calculated with the proposed method are in fact points where the armature current is on the q -axis.</abstract><pub>IEEE</pub><doi>10.1109/TIE.2018.2866096</doi><tpages>8</tpages><orcidid>https://orcid.org/0000-0002-9952-5274</orcidid><orcidid>https://orcid.org/0000-0002-2283-1054</orcidid></addata></record> |
| fulltext | fulltext_linktorsrc |
| identifier | ISSN: 0278-0046 |
| ispartof | IEEE transactions on industrial electronics (1982), 2019-07, Vol.66 (7), p.5049-5056 |
| issn | 0278-0046 1557-9948 |
| language | eng |
| recordid | cdi_crossref_primary_10_1109_TIE_2018_2866096 |
| source | IEEE Electronic Library (IEL) |
| subjects | Hydroelectric generators Integrated circuit modeling Load modeling Mathematical model parameter estimation Power generation Rotors Synchronous machines Transient analysis |
| title | Detailed Derivation and Experimental Validation of a Method for Obtaining Load Conditions for Salient Pole Synchronous Machine Quadrature Axis Parameters Determination |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-02-15T18%3A17%3A50IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-crossref_RIE&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Detailed%20Derivation%20and%20Experimental%20Validation%20of%20a%20Method%20for%20Obtaining%20Load%20Conditions%20for%20Salient%20Pole%20Synchronous%20Machine%20Quadrature%20Axis%20Parameters%20Determination&rft.jtitle=IEEE%20transactions%20on%20industrial%20electronics%20(1982)&rft.au=Giesbrecht,%20Mateus&rft.date=2019-07&rft.volume=66&rft.issue=7&rft.spage=5049&rft.epage=5056&rft.pages=5049-5056&rft.issn=0278-0046&rft.eissn=1557-9948&rft.coden=ITIED6&rft_id=info:doi/10.1109/TIE.2018.2866096&rft_dat=%3Ccrossref_RIE%3E10_1109_TIE_2018_2866096%3C/crossref_RIE%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rft_ieee_id=8450640&rfr_iscdi=true |