Investigation on vibration parameters in aluminum finned tube arrays subjected to water cross flow

PurposePredicting the critical velocity is crucial at the instability threshold for shell and tube heat exchangers in order to prevent tube failure due to vibrations. In this study, the vibration response of an aluminum tube bundle subjected to water cross flow was analyzed experimentally. Aluminum tubes are preferred over steel tubes because of aluminum tubes' excellent corrosion resistance, ease of manufacture, and high thermal efficiency.Design/methodology/approachThe fluid elastic instability and vortex shedding mechanisms in a finned tube array of aluminum tubes with a base tube diameter of 19.05 mm and pitch of 34 mm were investigated. The current study considers parallel triangular finned tube arrays with fin heights of 3 mm and 6 mm with a uniform fin thickness and fin pitch. The plain tube array was tested to compare the finned tube array results. The tube vibration response was measured using an accelerometer mounted on the middle tube of the third row. In order to define the fluid elastic instability behavior of various tube arrays, the critical velocity at the instability threshold is measured. By finding the Strouhal number at the small peaks before instability, the vortex shedding behavior of the tube arrays is examined.FindingsThe results reveal that the critical velocity at instability for coarse finned tube arrays increases as the fin height increases. The effect of the tube material is evaluated by comparing the results with those previously reported for parallel triangular tube arrays made of steel. Finally, the occurrence of vortex shedding in a tube array is confirmed based on the Reynolds number and Strouhal number relationship. The instability constant K for the plain tube array of steel and aluminum material are 4.97 and 4.87, respectively.Originality/valueThis paper provides the research findings on the effect of fin height on coarse density finned tube array. This will add substantial knowledge to the literature in the field of fluid elastic instability and vortex shedding, which is needed for the safe functioning of shell and tube heat exchangers.