Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts
It has been observed that considerable attention has been given to the use of cBN and/or ceramic tools for achieving better performance in the machining of superalloy Inconel 718. However, their cost limits the use in the engineering applications. In this article, the performance of multicoated TiN/...
Gespeichert in:
| Veröffentlicht in: | Materials and manufacturing processes 2012-10, Vol.27 (10), p.1066-1072 |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | 1072 |
|---|---|
| container_issue | 10 |
| container_start_page | 1066 |
| container_title | Materials and manufacturing processes |
| container_volume | 27 |
| creator | Thakur, D. G. Ramamoorthy, B. Vijayaraghavan, L. |
| description | It has been observed that considerable attention has been given to the use of cBN and/or ceramic tools for achieving better performance in the machining of superalloy Inconel 718. However, their cost limits the use in the engineering applications. In this article, the performance of multicoated TiN/TiAlN (PVD) coated and TiN/Al
2
O
3
/TiCN (CVD) coated tungsten carbide tools were investigated while high speed turning (HST) of superalloy Inconel 718. The effect of coating materials on cutting force, cutting temperature, vibration, and acoustic emission were recorded, analyzed, and reported. From the experimental results it has been found that TiN/Al
2
O
3
/TiCN (CVD) coated tool outperformed the TiN/TiAlN (PVD) coated tool in terms of machinability parameters such as cutting force and cutting temperature. From the fast Fourier transform (FFT) analysis of the vibration signals it was observed that the vibrations were less in case of the CVD coated tool than in case of the PVD coated tool. |
| doi_str_mv | 10.1080/10426914.2011.654158 |
| format | Article |
| fullrecord | <record><control><sourceid>crossref_infor</sourceid><recordid>TN_cdi_crossref_primary_10_1080_10426914_2011_654158</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>10_1080_10426914_2011_654158</sourcerecordid><originalsourceid>FETCH-LOGICAL-c307t-3f8d24b3b04a7ef728bffb82dad5bacd57c622c78cba7a5639a1d20ce8838563</originalsourceid><addsrcrecordid>eNp9kMtOAjEUhhujiYi-gYu-wGDbubSsDMELJBAX4Lo50wvUDC1pRw1vbyfo1tW55P__c_IhdE_JhBJBHiipWDOl1YQRSidNXdFaXKARrUtWsIrXl7nPkmLQXKOblD4IoVNO6xFKm3AweOm_TOrdDnoXfMLB44Xb7fHmaIzGT_GE16D2zju_w8HimYkhHUGZvO5NdNDlABW86TCnAr-nQbf-7HqnQhZoPIfYOj2cSSb26RZdWeiSufutY7R9ed7OF8Xq7XU5n60KVRLeF6UVmlVt2ZIKuLGcidbaVjANum5B6ZqrhjHFhWqBQ92UU6CaEWWEKEUex6g6x6r8borGymN0B4gnSYkcuMk_bnLgJs_csu3xbHPehniA7xA7LXs4dSHaCF65JMt_E34AgTR1fQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts</title><source>Business Source Complete</source><creator>Thakur, D. G. ; Ramamoorthy, B. ; Vijayaraghavan, L.</creator><creatorcontrib>Thakur, D. G. ; Ramamoorthy, B. ; Vijayaraghavan, L.</creatorcontrib><description>It has been observed that considerable attention has been given to the use of cBN and/or ceramic tools for achieving better performance in the machining of superalloy Inconel 718. However, their cost limits the use in the engineering applications. In this article, the performance of multicoated TiN/TiAlN (PVD) coated and TiN/Al
2
O
3
/TiCN (CVD) coated tungsten carbide tools were investigated while high speed turning (HST) of superalloy Inconel 718. The effect of coating materials on cutting force, cutting temperature, vibration, and acoustic emission were recorded, analyzed, and reported. From the experimental results it has been found that TiN/Al
2
O
3
/TiCN (CVD) coated tool outperformed the TiN/TiAlN (PVD) coated tool in terms of machinability parameters such as cutting force and cutting temperature. From the fast Fourier transform (FFT) analysis of the vibration signals it was observed that the vibrations were less in case of the CVD coated tool than in case of the PVD coated tool.</description><identifier>ISSN: 1042-6914</identifier><identifier>EISSN: 1532-2475</identifier><identifier>DOI: 10.1080/10426914.2011.654158</identifier><language>eng</language><publisher>Taylor & Francis Group</publisher><subject>Coating ; HST ; Inconel 718</subject><ispartof>Materials and manufacturing processes, 2012-10, Vol.27 (10), p.1066-1072</ispartof><rights>Copyright Taylor & Francis Group, LLC 2012</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c307t-3f8d24b3b04a7ef728bffb82dad5bacd57c622c78cba7a5639a1d20ce8838563</citedby><cites>FETCH-LOGICAL-c307t-3f8d24b3b04a7ef728bffb82dad5bacd57c622c78cba7a5639a1d20ce8838563</cites></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>314,780,784,27924,27925</link.rule.ids></links><search><creatorcontrib>Thakur, D. G.</creatorcontrib><creatorcontrib>Ramamoorthy, B.</creatorcontrib><creatorcontrib>Vijayaraghavan, L.</creatorcontrib><title>Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts</title><title>Materials and manufacturing processes</title><description>It has been observed that considerable attention has been given to the use of cBN and/or ceramic tools for achieving better performance in the machining of superalloy Inconel 718. However, their cost limits the use in the engineering applications. In this article, the performance of multicoated TiN/TiAlN (PVD) coated and TiN/Al
2
O
3
/TiCN (CVD) coated tungsten carbide tools were investigated while high speed turning (HST) of superalloy Inconel 718. The effect of coating materials on cutting force, cutting temperature, vibration, and acoustic emission were recorded, analyzed, and reported. From the experimental results it has been found that TiN/Al
2
O
3
/TiCN (CVD) coated tool outperformed the TiN/TiAlN (PVD) coated tool in terms of machinability parameters such as cutting force and cutting temperature. From the fast Fourier transform (FFT) analysis of the vibration signals it was observed that the vibrations were less in case of the CVD coated tool than in case of the PVD coated tool.</description><subject>Coating</subject><subject>HST</subject><subject>Inconel 718</subject><issn>1042-6914</issn><issn>1532-2475</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2012</creationdate><recordtype>article</recordtype><recordid>eNp9kMtOAjEUhhujiYi-gYu-wGDbubSsDMELJBAX4Lo50wvUDC1pRw1vbyfo1tW55P__c_IhdE_JhBJBHiipWDOl1YQRSidNXdFaXKARrUtWsIrXl7nPkmLQXKOblD4IoVNO6xFKm3AweOm_TOrdDnoXfMLB44Xb7fHmaIzGT_GE16D2zju_w8HimYkhHUGZvO5NdNDlABW86TCnAr-nQbf-7HqnQhZoPIfYOj2cSSb26RZdWeiSufutY7R9ed7OF8Xq7XU5n60KVRLeF6UVmlVt2ZIKuLGcidbaVjANum5B6ZqrhjHFhWqBQ92UU6CaEWWEKEUex6g6x6r8borGymN0B4gnSYkcuMk_bnLgJs_csu3xbHPehniA7xA7LXs4dSHaCF65JMt_E34AgTR1fQ</recordid><startdate>20121001</startdate><enddate>20121001</enddate><creator>Thakur, D. G.</creator><creator>Ramamoorthy, B.</creator><creator>Vijayaraghavan, L.</creator><general>Taylor & Francis Group</general><scope>AAYXX</scope><scope>CITATION</scope></search><sort><creationdate>20121001</creationdate><title>Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts</title><author>Thakur, D. G. ; Ramamoorthy, B. ; Vijayaraghavan, L.</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c307t-3f8d24b3b04a7ef728bffb82dad5bacd57c622c78cba7a5639a1d20ce8838563</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2012</creationdate><topic>Coating</topic><topic>HST</topic><topic>Inconel 718</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Thakur, D. G.</creatorcontrib><creatorcontrib>Ramamoorthy, B.</creatorcontrib><creatorcontrib>Vijayaraghavan, L.</creatorcontrib><collection>CrossRef</collection><jtitle>Materials and manufacturing processes</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Thakur, D. G.</au><au>Ramamoorthy, B.</au><au>Vijayaraghavan, L.</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts</atitle><jtitle>Materials and manufacturing processes</jtitle><date>2012-10-01</date><risdate>2012</risdate><volume>27</volume><issue>10</issue><spage>1066</spage><epage>1072</epage><pages>1066-1072</pages><issn>1042-6914</issn><eissn>1532-2475</eissn><abstract>It has been observed that considerable attention has been given to the use of cBN and/or ceramic tools for achieving better performance in the machining of superalloy Inconel 718. However, their cost limits the use in the engineering applications. In this article, the performance of multicoated TiN/TiAlN (PVD) coated and TiN/Al
2
O
3
/TiCN (CVD) coated tungsten carbide tools were investigated while high speed turning (HST) of superalloy Inconel 718. The effect of coating materials on cutting force, cutting temperature, vibration, and acoustic emission were recorded, analyzed, and reported. From the experimental results it has been found that TiN/Al
2
O
3
/TiCN (CVD) coated tool outperformed the TiN/TiAlN (PVD) coated tool in terms of machinability parameters such as cutting force and cutting temperature. From the fast Fourier transform (FFT) analysis of the vibration signals it was observed that the vibrations were less in case of the CVD coated tool than in case of the PVD coated tool.</abstract><pub>Taylor & Francis Group</pub><doi>10.1080/10426914.2011.654158</doi><tpages>7</tpages></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1042-6914 |
| ispartof | Materials and manufacturing processes, 2012-10, Vol.27 (10), p.1066-1072 |
| issn | 1042-6914 1532-2475 |
| language | eng |
| recordid | cdi_crossref_primary_10_1080_10426914_2011_654158 |
| source | Business Source Complete |
| subjects | Coating HST Inconel 718 |
| title | Some Investigations on High Speed Dry Machining of Aerospace Material Inconel 718 Using Multicoated Carbide Inserts |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-04T21%3A58%3A18IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-crossref_infor&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Some%20Investigations%20on%20High%20Speed%20Dry%20Machining%20of%20Aerospace%20Material%20Inconel%20718%20Using%20Multicoated%20Carbide%20Inserts&rft.jtitle=Materials%20and%20manufacturing%20processes&rft.au=Thakur,%20D.%20G.&rft.date=2012-10-01&rft.volume=27&rft.issue=10&rft.spage=1066&rft.epage=1072&rft.pages=1066-1072&rft.issn=1042-6914&rft.eissn=1532-2475&rft_id=info:doi/10.1080/10426914.2011.654158&rft_dat=%3Ccrossref_infor%3E10_1080_10426914_2011_654158%3C/crossref_infor%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |