Non-isolated conventional DC-DC converter comparison for a photovoltaic system: A review
The output power from a photovoltaic (PV) system varies due to its high dependency on the surrounding irradiance and temperature. To overcome this, a maximum power point (MPP) tracker is used alongside a DC-DC converter to track the varying power. The purpose of the DC-DC converter is to interface t...
Gespeichert in:
| Veröffentlicht in: | Journal of renewable and sustainable energy 2020-01, Vol.12 (1) |
|---|---|
| Hauptverfasser: | , , |
| Format: | Artikel |
| Sprache: | eng |
| Schlagworte: | |
| Online-Zugang: | Volltext |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| container_end_page | |
|---|---|
| container_issue | 1 |
| container_start_page | |
| container_title | Journal of renewable and sustainable energy |
| container_volume | 12 |
| creator | Jotham Jeremy, L. Ooi, Chia Ai Teh, Jiashen |
| description | The output power from a photovoltaic (PV) system varies due to its high dependency on the surrounding irradiance and temperature. To overcome this, a maximum power point (MPP) tracker is used alongside a DC-DC converter to track the varying power. The purpose of the DC-DC converter is to interface the PV system to the load on the grid or a standalone system by balancing the power between them. Selection of the appropriate DC-DC converter is essential because it plays an important role in the overall performance of the PV system. In this paper, various nonisolated conventional DC-DC converter topologies are reviewed, compared, and discussed. The review and discussion of each converter are based on the recent development of converters in terms of efficiency, steady state oscillation, number of components, voltage transfer, and tracking speed. The advantages and disadvantages of the recent topologies within this scope are also highlighted in this paper. A simulation work has been performed to validate the performance of all the reviewed converters using the perturb and observe MPP tracking algorithm under different sets of irradiance and temperature. Finally, this paper also provides a selection method to select the best converter in a stand-alone PV system. |
| doi_str_mv | 10.1063/1.5095811 |
| format | Article |
| fullrecord | <record><control><sourceid>proquest_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1063_1_5095811</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2340459201</sourcerecordid><originalsourceid>FETCH-LOGICAL-c327t-e428bccddded0fdd409455105d6183c959fdb22d6c13e494251b6beefc77a1b23</originalsourceid><addsrcrecordid>eNp90F1LwzAUBuAgCs7phf8g4JVCZ06atKt3o_MLht4oeBfSJMWOtqlJVtm_t6NDBcGrczg8vBxehM6BzIAk8TXMOMn4HOAATSBjEKUE6OGv_RideL8mJKGE0wl6e7JtVHlby2A0VrbtTRsq28oaL_NomY8nF4wbtqaTbrAtLq3DEnfvNtje1kFWCvutD6a5wQvsTF-Zz1N0VMram7P9nKLXu9uX_CFaPd8_5otVpGKahsgwOi-U0lobTUqtGckY50C4TmAeq4xnpS4o1YmC2LCMUQ5FUhhTqjSVUNB4ii7G3M7Zj43xQaztxg3_e0FjRhjPKIFBXY5KOeu9M6XoXNVItxVAxK44AWJf3GCvRutVFeSujG_cW_cDRafL__Df5C9eCnxZ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype><pqid>2340459201</pqid></control><display><type>article</type><title>Non-isolated conventional DC-DC converter comparison for a photovoltaic system: A review</title><source>AIP Journals Complete</source><creator>Jotham Jeremy, L. ; Ooi, Chia Ai ; Teh, Jiashen</creator><creatorcontrib>Jotham Jeremy, L. ; Ooi, Chia Ai ; Teh, Jiashen</creatorcontrib><description>The output power from a photovoltaic (PV) system varies due to its high dependency on the surrounding irradiance and temperature. To overcome this, a maximum power point (MPP) tracker is used alongside a DC-DC converter to track the varying power. The purpose of the DC-DC converter is to interface the PV system to the load on the grid or a standalone system by balancing the power between them. Selection of the appropriate DC-DC converter is essential because it plays an important role in the overall performance of the PV system. In this paper, various nonisolated conventional DC-DC converter topologies are reviewed, compared, and discussed. The review and discussion of each converter are based on the recent development of converters in terms of efficiency, steady state oscillation, number of components, voltage transfer, and tracking speed. The advantages and disadvantages of the recent topologies within this scope are also highlighted in this paper. A simulation work has been performed to validate the performance of all the reviewed converters using the perturb and observe MPP tracking algorithm under different sets of irradiance and temperature. Finally, this paper also provides a selection method to select the best converter in a stand-alone PV system.</description><identifier>ISSN: 1941-7012</identifier><identifier>EISSN: 1941-7012</identifier><identifier>DOI: 10.1063/1.5095811</identifier><identifier>CODEN: JRSEBH</identifier><language>eng</language><publisher>Melville: American Institute of Physics</publisher><subject>Algorithms ; Circuits ; Computer simulation ; Converters ; Irradiance ; Maximum power ; Photovoltaic cells ; Topology ; Tracking ; Voltage converters (DC to DC)</subject><ispartof>Journal of renewable and sustainable energy, 2020-01, Vol.12 (1)</ispartof><rights>Author(s)</rights><rights>2020 Author(s). Published under license by AIP Publishing.</rights><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-c327t-e428bccddded0fdd409455105d6183c959fdb22d6c13e494251b6beefc77a1b23</citedby><cites>FETCH-LOGICAL-c327t-e428bccddded0fdd409455105d6183c959fdb22d6c13e494251b6beefc77a1b23</cites><orcidid>0000-0001-8177-9164 ; 0000-0001-9741-6245 ; 0000-0001-7148-8769</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktohtml>$$Uhttps://pubs.aip.org/jrse/article-lookup/doi/10.1063/1.5095811$$EHTML$$P50$$Gscitation$$H</linktohtml><link.rule.ids>314,776,780,790,4498,27901,27902,76127</link.rule.ids></links><search><creatorcontrib>Jotham Jeremy, L.</creatorcontrib><creatorcontrib>Ooi, Chia Ai</creatorcontrib><creatorcontrib>Teh, Jiashen</creatorcontrib><title>Non-isolated conventional DC-DC converter comparison for a photovoltaic system: A review</title><title>Journal of renewable and sustainable energy</title><description>The output power from a photovoltaic (PV) system varies due to its high dependency on the surrounding irradiance and temperature. To overcome this, a maximum power point (MPP) tracker is used alongside a DC-DC converter to track the varying power. The purpose of the DC-DC converter is to interface the PV system to the load on the grid or a standalone system by balancing the power between them. Selection of the appropriate DC-DC converter is essential because it plays an important role in the overall performance of the PV system. In this paper, various nonisolated conventional DC-DC converter topologies are reviewed, compared, and discussed. The review and discussion of each converter are based on the recent development of converters in terms of efficiency, steady state oscillation, number of components, voltage transfer, and tracking speed. The advantages and disadvantages of the recent topologies within this scope are also highlighted in this paper. A simulation work has been performed to validate the performance of all the reviewed converters using the perturb and observe MPP tracking algorithm under different sets of irradiance and temperature. Finally, this paper also provides a selection method to select the best converter in a stand-alone PV system.</description><subject>Algorithms</subject><subject>Circuits</subject><subject>Computer simulation</subject><subject>Converters</subject><subject>Irradiance</subject><subject>Maximum power</subject><subject>Photovoltaic cells</subject><subject>Topology</subject><subject>Tracking</subject><subject>Voltage converters (DC to DC)</subject><issn>1941-7012</issn><issn>1941-7012</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2020</creationdate><recordtype>article</recordtype><recordid>eNp90F1LwzAUBuAgCs7phf8g4JVCZ06atKt3o_MLht4oeBfSJMWOtqlJVtm_t6NDBcGrczg8vBxehM6BzIAk8TXMOMn4HOAATSBjEKUE6OGv_RideL8mJKGE0wl6e7JtVHlby2A0VrbtTRsq28oaL_NomY8nF4wbtqaTbrAtLq3DEnfvNtje1kFWCvutD6a5wQvsTF-Zz1N0VMram7P9nKLXu9uX_CFaPd8_5otVpGKahsgwOi-U0lobTUqtGckY50C4TmAeq4xnpS4o1YmC2LCMUQ5FUhhTqjSVUNB4ii7G3M7Zj43xQaztxg3_e0FjRhjPKIFBXY5KOeu9M6XoXNVItxVAxK44AWJf3GCvRutVFeSujG_cW_cDRafL__Df5C9eCnxZ</recordid><startdate>202001</startdate><enddate>202001</enddate><creator>Jotham Jeremy, L.</creator><creator>Ooi, Chia Ai</creator><creator>Teh, Jiashen</creator><general>American Institute of Physics</general><scope>AAYXX</scope><scope>CITATION</scope><scope>8FD</scope><scope>H8D</scope><scope>L7M</scope><orcidid>https://orcid.org/0000-0001-8177-9164</orcidid><orcidid>https://orcid.org/0000-0001-9741-6245</orcidid><orcidid>https://orcid.org/0000-0001-7148-8769</orcidid></search><sort><creationdate>202001</creationdate><title>Non-isolated conventional DC-DC converter comparison for a photovoltaic system: A review</title><author>Jotham Jeremy, L. ; Ooi, Chia Ai ; Teh, Jiashen</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-c327t-e428bccddded0fdd409455105d6183c959fdb22d6c13e494251b6beefc77a1b23</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2020</creationdate><topic>Algorithms</topic><topic>Circuits</topic><topic>Computer simulation</topic><topic>Converters</topic><topic>Irradiance</topic><topic>Maximum power</topic><topic>Photovoltaic cells</topic><topic>Topology</topic><topic>Tracking</topic><topic>Voltage converters (DC to DC)</topic><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Jotham Jeremy, L.</creatorcontrib><creatorcontrib>Ooi, Chia Ai</creatorcontrib><creatorcontrib>Teh, Jiashen</creatorcontrib><collection>CrossRef</collection><collection>Technology Research Database</collection><collection>Aerospace Database</collection><collection>Advanced Technologies Database with Aerospace</collection><jtitle>Journal of renewable and sustainable energy</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Jotham Jeremy, L.</au><au>Ooi, Chia Ai</au><au>Teh, Jiashen</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Non-isolated conventional DC-DC converter comparison for a photovoltaic system: A review</atitle><jtitle>Journal of renewable and sustainable energy</jtitle><date>2020-01</date><risdate>2020</risdate><volume>12</volume><issue>1</issue><issn>1941-7012</issn><eissn>1941-7012</eissn><coden>JRSEBH</coden><abstract>The output power from a photovoltaic (PV) system varies due to its high dependency on the surrounding irradiance and temperature. To overcome this, a maximum power point (MPP) tracker is used alongside a DC-DC converter to track the varying power. The purpose of the DC-DC converter is to interface the PV system to the load on the grid or a standalone system by balancing the power between them. Selection of the appropriate DC-DC converter is essential because it plays an important role in the overall performance of the PV system. In this paper, various nonisolated conventional DC-DC converter topologies are reviewed, compared, and discussed. The review and discussion of each converter are based on the recent development of converters in terms of efficiency, steady state oscillation, number of components, voltage transfer, and tracking speed. The advantages and disadvantages of the recent topologies within this scope are also highlighted in this paper. A simulation work has been performed to validate the performance of all the reviewed converters using the perturb and observe MPP tracking algorithm under different sets of irradiance and temperature. Finally, this paper also provides a selection method to select the best converter in a stand-alone PV system.</abstract><cop>Melville</cop><pub>American Institute of Physics</pub><doi>10.1063/1.5095811</doi><tpages>21</tpages><orcidid>https://orcid.org/0000-0001-8177-9164</orcidid><orcidid>https://orcid.org/0000-0001-9741-6245</orcidid><orcidid>https://orcid.org/0000-0001-7148-8769</orcidid></addata></record> |
| fulltext | fulltext |
| identifier | ISSN: 1941-7012 |
| ispartof | Journal of renewable and sustainable energy, 2020-01, Vol.12 (1) |
| issn | 1941-7012 1941-7012 |
| language | eng |
| recordid | cdi_crossref_primary_10_1063_1_5095811 |
| source | AIP Journals Complete |
| subjects | Algorithms Circuits Computer simulation Converters Irradiance Maximum power Photovoltaic cells Topology Tracking Voltage converters (DC to DC) |
| title | Non-isolated conventional DC-DC converter comparison for a photovoltaic system: A review |
| url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2025-01-29T02%3A58%3A39IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-proquest_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Non-isolated%20conventional%20DC-DC%20converter%20comparison%20for%20a%20photovoltaic%20system:%20A%20review&rft.jtitle=Journal%20of%20renewable%20and%20sustainable%20energy&rft.au=Jotham%20Jeremy,%20L.&rft.date=2020-01&rft.volume=12&rft.issue=1&rft.issn=1941-7012&rft.eissn=1941-7012&rft.coden=JRSEBH&rft_id=info:doi/10.1063/1.5095811&rft_dat=%3Cproquest_cross%3E2340459201%3C/proquest_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_pqid=2340459201&rft_id=info:pmid/&rfr_iscdi=true |