Initiated Chemical Vapor Deposition of Poly(Ethylhexyl Acrylate) Films in a Large-Scale Batch Reactor
The present study demonstrates the successful deposition of poly(ethylhexyl acrylate) thin films in a large-scale closed-batch initiated chemical vapor deposition (iCVD) system. A horizontal cylindrical stainless-steel vacuum tank, which is highly utilized in industrial vacuum applications, was use...
Gespeichert in:
Veröffentlicht in: | Industrial & engineering chemistry research 2019-08, Vol.58 (32), p.14795-14801 |
---|---|
Hauptverfasser: | , , , |
Format: | Artikel |
Sprache: | eng |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
container_end_page | 14801 |
---|---|
container_issue | 32 |
container_start_page | 14795 |
container_title | Industrial & engineering chemistry research |
container_volume | 58 |
creator | Yılmaz, Kurtuluş Şakalak, Hüseyin Gürsoy, Mehmet Karaman, Mustafa |
description | The present study demonstrates the successful deposition of poly(ethylhexyl acrylate) thin films in a large-scale closed-batch initiated chemical vapor deposition (iCVD) system. A horizontal cylindrical stainless-steel vacuum tank, which is highly utilized in industrial vacuum applications, was used as iCVD reactor. The effects of substrate temperature, precursor ratio, and pressure on the deposition rates were studied, and the results showed that a deposition rate of 315 nm/min can be achieved in a single run at a reactor pressure of 600 mTorr. At a lower chamber pressure of 400 mTorr, deposition rate decreases, whereas film uniformity increases. By carrying out depositions at successive cycles, thicker films could be obtained, without the need for extensive monomer consumption. The yield percentage was found to be 3.5 for the films deposited in closed-batch system at 400 mTorr, which is 35-fold larger than that of the classical iCVD flow system. |
doi_str_mv | 10.1021/acs.iecr.9b02213 |
format | Article |
fullrecord | <record><control><sourceid>acs_cross</sourceid><recordid>TN_cdi_crossref_primary_10_1021_acs_iecr_9b02213</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>a656556164</sourcerecordid><originalsourceid>FETCH-LOGICAL-a317t-722f2637f23c5459ed1908ac68f24557dadbc2ea5f423adb5224c7946d81d0863</originalsourceid><addsrcrecordid>eNp1kE1LAzEQhoMoWKt3jzkquDXJJrvZY62tFgqKX9dlmk3clHRTkhXcf29Ke_U0A-88L8OD0DUlE0oYvQcVJ1arMKnWhDGan6ARFYxkgnBxikZESpkJKcU5uohxQwgRgvMR0svO9hZ63eBZq7dWgcNfsPMBP-qdjynzHfYGv3o33Mz7dnCt_h0cnqowuITd4oV124hthwGvIHzr7D11aPwAvWrxmwbV-3CJzgy4qK-Oc4w-F_OP2XO2enlazqarDHJa9lnJmGFFXhqWK8FFpRtaEQmqkIZxIcoGmrViGoThLE-7YIyrsuJFI2lDZJGPETn0quBjDNrUu2C3EIaaknqvqU6a6r2m-qgpIXcHZJ9s_E_o0oP_n_8Bm8hrvQ</addsrcrecordid><sourcetype>Aggregation Database</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>Initiated Chemical Vapor Deposition of Poly(Ethylhexyl Acrylate) Films in a Large-Scale Batch Reactor</title><source>American Chemical Society Journals</source><creator>Yılmaz, Kurtuluş ; Şakalak, Hüseyin ; Gürsoy, Mehmet ; Karaman, Mustafa</creator><creatorcontrib>Yılmaz, Kurtuluş ; Şakalak, Hüseyin ; Gürsoy, Mehmet ; Karaman, Mustafa</creatorcontrib><description>The present study demonstrates the successful deposition of poly(ethylhexyl acrylate) thin films in a large-scale closed-batch initiated chemical vapor deposition (iCVD) system. A horizontal cylindrical stainless-steel vacuum tank, which is highly utilized in industrial vacuum applications, was used as iCVD reactor. The effects of substrate temperature, precursor ratio, and pressure on the deposition rates were studied, and the results showed that a deposition rate of 315 nm/min can be achieved in a single run at a reactor pressure of 600 mTorr. At a lower chamber pressure of 400 mTorr, deposition rate decreases, whereas film uniformity increases. By carrying out depositions at successive cycles, thicker films could be obtained, without the need for extensive monomer consumption. The yield percentage was found to be 3.5 for the films deposited in closed-batch system at 400 mTorr, which is 35-fold larger than that of the classical iCVD flow system.</description><identifier>ISSN: 0888-5885</identifier><identifier>EISSN: 1520-5045</identifier><identifier>DOI: 10.1021/acs.iecr.9b02213</identifier><language>eng</language><publisher>American Chemical Society</publisher><ispartof>Industrial & engineering chemistry research, 2019-08, Vol.58 (32), p.14795-14801</ispartof><lds50>peer_reviewed</lds50><woscitedreferencessubscribed>false</woscitedreferencessubscribed><citedby>FETCH-LOGICAL-a317t-722f2637f23c5459ed1908ac68f24557dadbc2ea5f423adb5224c7946d81d0863</citedby><cites>FETCH-LOGICAL-a317t-722f2637f23c5459ed1908ac68f24557dadbc2ea5f423adb5224c7946d81d0863</cites><orcidid>0000-0003-2275-9096 ; 0000-0001-8987-4246</orcidid></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><linktopdf>$$Uhttps://pubs.acs.org/doi/pdf/10.1021/acs.iecr.9b02213$$EPDF$$P50$$Gacs$$H</linktopdf><linktohtml>$$Uhttps://pubs.acs.org/doi/10.1021/acs.iecr.9b02213$$EHTML$$P50$$Gacs$$H</linktohtml><link.rule.ids>314,780,784,2765,27076,27924,27925,56738,56788</link.rule.ids></links><search><creatorcontrib>Yılmaz, Kurtuluş</creatorcontrib><creatorcontrib>Şakalak, Hüseyin</creatorcontrib><creatorcontrib>Gürsoy, Mehmet</creatorcontrib><creatorcontrib>Karaman, Mustafa</creatorcontrib><title>Initiated Chemical Vapor Deposition of Poly(Ethylhexyl Acrylate) Films in a Large-Scale Batch Reactor</title><title>Industrial & engineering chemistry research</title><addtitle>Ind. Eng. Chem. Res</addtitle><description>The present study demonstrates the successful deposition of poly(ethylhexyl acrylate) thin films in a large-scale closed-batch initiated chemical vapor deposition (iCVD) system. A horizontal cylindrical stainless-steel vacuum tank, which is highly utilized in industrial vacuum applications, was used as iCVD reactor. The effects of substrate temperature, precursor ratio, and pressure on the deposition rates were studied, and the results showed that a deposition rate of 315 nm/min can be achieved in a single run at a reactor pressure of 600 mTorr. At a lower chamber pressure of 400 mTorr, deposition rate decreases, whereas film uniformity increases. By carrying out depositions at successive cycles, thicker films could be obtained, without the need for extensive monomer consumption. The yield percentage was found to be 3.5 for the films deposited in closed-batch system at 400 mTorr, which is 35-fold larger than that of the classical iCVD flow system.</description><issn>0888-5885</issn><issn>1520-5045</issn><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2019</creationdate><recordtype>article</recordtype><recordid>eNp1kE1LAzEQhoMoWKt3jzkquDXJJrvZY62tFgqKX9dlmk3clHRTkhXcf29Ke_U0A-88L8OD0DUlE0oYvQcVJ1arMKnWhDGan6ARFYxkgnBxikZESpkJKcU5uohxQwgRgvMR0svO9hZ63eBZq7dWgcNfsPMBP-qdjynzHfYGv3o33Mz7dnCt_h0cnqowuITd4oV124hthwGvIHzr7D11aPwAvWrxmwbV-3CJzgy4qK-Oc4w-F_OP2XO2enlazqarDHJa9lnJmGFFXhqWK8FFpRtaEQmqkIZxIcoGmrViGoThLE-7YIyrsuJFI2lDZJGPETn0quBjDNrUu2C3EIaaknqvqU6a6r2m-qgpIXcHZJ9s_E_o0oP_n_8Bm8hrvQ</recordid><startdate>20190814</startdate><enddate>20190814</enddate><creator>Yılmaz, Kurtuluş</creator><creator>Şakalak, Hüseyin</creator><creator>Gürsoy, Mehmet</creator><creator>Karaman, Mustafa</creator><general>American Chemical Society</general><scope>AAYXX</scope><scope>CITATION</scope><orcidid>https://orcid.org/0000-0003-2275-9096</orcidid><orcidid>https://orcid.org/0000-0001-8987-4246</orcidid></search><sort><creationdate>20190814</creationdate><title>Initiated Chemical Vapor Deposition of Poly(Ethylhexyl Acrylate) Films in a Large-Scale Batch Reactor</title><author>Yılmaz, Kurtuluş ; Şakalak, Hüseyin ; Gürsoy, Mehmet ; Karaman, Mustafa</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-LOGICAL-a317t-722f2637f23c5459ed1908ac68f24557dadbc2ea5f423adb5224c7946d81d0863</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2019</creationdate><toplevel>peer_reviewed</toplevel><toplevel>online_resources</toplevel><creatorcontrib>Yılmaz, Kurtuluş</creatorcontrib><creatorcontrib>Şakalak, Hüseyin</creatorcontrib><creatorcontrib>Gürsoy, Mehmet</creatorcontrib><creatorcontrib>Karaman, Mustafa</creatorcontrib><collection>CrossRef</collection><jtitle>Industrial & engineering chemistry research</jtitle></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext</fulltext></delivery><addata><au>Yılmaz, Kurtuluş</au><au>Şakalak, Hüseyin</au><au>Gürsoy, Mehmet</au><au>Karaman, Mustafa</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>Initiated Chemical Vapor Deposition of Poly(Ethylhexyl Acrylate) Films in a Large-Scale Batch Reactor</atitle><jtitle>Industrial & engineering chemistry research</jtitle><addtitle>Ind. Eng. Chem. Res</addtitle><date>2019-08-14</date><risdate>2019</risdate><volume>58</volume><issue>32</issue><spage>14795</spage><epage>14801</epage><pages>14795-14801</pages><issn>0888-5885</issn><eissn>1520-5045</eissn><abstract>The present study demonstrates the successful deposition of poly(ethylhexyl acrylate) thin films in a large-scale closed-batch initiated chemical vapor deposition (iCVD) system. A horizontal cylindrical stainless-steel vacuum tank, which is highly utilized in industrial vacuum applications, was used as iCVD reactor. The effects of substrate temperature, precursor ratio, and pressure on the deposition rates were studied, and the results showed that a deposition rate of 315 nm/min can be achieved in a single run at a reactor pressure of 600 mTorr. At a lower chamber pressure of 400 mTorr, deposition rate decreases, whereas film uniformity increases. By carrying out depositions at successive cycles, thicker films could be obtained, without the need for extensive monomer consumption. The yield percentage was found to be 3.5 for the films deposited in closed-batch system at 400 mTorr, which is 35-fold larger than that of the classical iCVD flow system.</abstract><pub>American Chemical Society</pub><doi>10.1021/acs.iecr.9b02213</doi><tpages>7</tpages><orcidid>https://orcid.org/0000-0003-2275-9096</orcidid><orcidid>https://orcid.org/0000-0001-8987-4246</orcidid></addata></record> |
fulltext | fulltext |
identifier | ISSN: 0888-5885 |
ispartof | Industrial & engineering chemistry research, 2019-08, Vol.58 (32), p.14795-14801 |
issn | 0888-5885 1520-5045 |
language | eng |
recordid | cdi_crossref_primary_10_1021_acs_iecr_9b02213 |
source | American Chemical Society Journals |
title | Initiated Chemical Vapor Deposition of Poly(Ethylhexyl Acrylate) Films in a Large-Scale Batch Reactor |
url | https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T22%3A22%3A36IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-acs_cross&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=Initiated%20Chemical%20Vapor%20Deposition%20of%20Poly(Ethylhexyl%20Acrylate)%20Films%20in%20a%20Large-Scale%20Batch%20Reactor&rft.jtitle=Industrial%20&%20engineering%20chemistry%20research&rft.au=Y%C4%B1lmaz,%20Kurtulus%CC%A7&rft.date=2019-08-14&rft.volume=58&rft.issue=32&rft.spage=14795&rft.epage=14801&rft.pages=14795-14801&rft.issn=0888-5885&rft.eissn=1520-5045&rft_id=info:doi/10.1021/acs.iecr.9b02213&rft_dat=%3Cacs_cross%3Ea656556164%3C/acs_cross%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true |