Investigation of the influence of morphology on thermal conductivity in hexagonal honeycomb structures and computational models with varied volume fraction and conductivity ratio

•The models for thermal conductivity tensor of two types honeycombs are proposed.•Impact of the wall uniformity within honeycomb on the thermal property is quantified.•Honeycomb ETC's max anisotropic porosity reduces as thermal conductivity ratio rises. The effective thermal conductivity (ETC) is a critical parameter for simulating macroscopic heat transfer processes in composite materials, which estimation is particularly critical where the thermal conductivity of the composite phases is completely different. The huge difference in thermal conductivity of the composite phases makes their volume fraction modulation a classical way to reach the desired thermal conductivity. Nevertheless, the typical manufacturing process of honeycomb cellular structures allows various degrees of stretching of the structure, leading to various honeycomb geometries. In these ‘real’ structures some of the honeycomb wall sides are twice as thick as other parts, modifying the symmetry of the system with respect to honeycomb with uniform wall side thickness. A noticeable example of these composites is that of a hexagonal metallic honeycomb structure filled with phase change material (PCM) which is a widely utilized material in the field of thermal storage and thermal management by exploiting the heat absorbed/released by the PCM phase during its melting/solidification. While the thermal response of a PCM composite during a thermal cycle is not only defined by thermal conductivity (but also by cell size), this represents the basis for the with the optimization of a system based on a composite PCM. For this reason, in this study, steady-state simulations of heat transfer in unit honeycomb cells in different directions perpendicular to the cell axis are conducted to quantify the impact of morphology on the thermal property of the different wall types within honeycomb structures. The results demonstrate that in both SHS and DHS, the porosity exhibiting maximum anisotropy of ETC decreases as the thermal conductivity ratio increases. Moreover, simple predictive models for calculating the ETC in all directions are proposed for each type of honeycomb, considering a wide range of porosity and thermal conductivity ratio, with a relative error limited to 2 %. [Display omitted]