Data-driven Koopman model predictive control for hybrid energy storage system of electric vehicles under vehicle-following scenarios
In the current studies on energy management strategy (EMS) for vehicle-following scenarios, the accuracy of vehicle state predictions based on mechanistic models is influenced by the time-varying conditions, affecting the optimization control performance. To address this issue, a data-driven Koopman...
Gespeichert in:
Veröffentlicht in: | Applied energy 2024-07, Vol.365, p.123218, Article 123218 |
---|---|
Hauptverfasser: | , , , , , , |
Format: | Artikel |
Sprache: | eng |
Schlagworte: | |
Online-Zugang: | Volltext |
Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
Zusammenfassung: | In the current studies on energy management strategy (EMS) for vehicle-following scenarios, the accuracy of vehicle state predictions based on mechanistic models is influenced by the time-varying conditions, affecting the optimization control performance. To address this issue, a data-driven Koopman model predictive control for hybrid energy storage system (HESS) of electric vehicles (EVs) in vehicle-following scenarios is proposed, combining the safety speed planning and energy management strategy. Firstly, a data-driven Koopman vehicle state prediction model is constructed in the upper layer for estimating parameters, such as road surface smoothness and slope. This model is then integrated into Model Predictive Control (MPC) to optimize the speed of the following vehicle. Subsequently, in the lower layer, utilizing the output from the upper layer and predicting load power, the load power is further allocated within the HESS. Simulation results demonstrate that in scenarios considering factors like slope, the hierarchical MPC with the Koopman model reduces energy consumption by 5.55% compared to the hierarchical MPC with mechanistic model.
•Data-driven Koopman MPC for EVs under vehicle-following scenarios is proposed.•A Koopman prediction model is developed considering parameters such as slope.•The proposed method reduces energy consumption by 5.55%. |
---|---|
ISSN: | 0306-2619 1872-9118 |
DOI: | 10.1016/j.apenergy.2024.123218 |