Shockwave and spallation in silver and other materials by sub‐ns laser pulse at 10 16  W/cm 2 intensity

The laser spallation effect due to intense shockwaves caused by a brief and intense laser pulse irradiating a target surface, 2 mm thick, has been investigated for silver and other materials. For 300 ps IR laser pulse, at intensities of the order of 10 16 W/cm 2 , the shockwave may produce deformations of the back‐face in ductile materials, such as Ag, Cu and Al. In heavy materials with high tensile strength, such as Ta, the shockwave produces cracks in the bottom of the laser crater but not deformation in the back‐face, while in brittle materials, such as monocrystalline Ge, it produces only superficial cracks and flaking, but not deformation and spallation of the back‐face. In thick polymeric materials, such as high‐density polyethylene, the ablated crater shape is well defined and the shockwave is strongly damped, and no deformation has been observed in the back‐face. The laser ablation yield and the ion acceleration in the backward direction have been measured by mass lost and time‐of‐flight measurements. SEM microscopy of the different irradiated targets, showing details of the crater size, edges, flaking and deformation in the back‐face, useful for a discussion on the shockwave propagation and shock pressure calculation, is presented.