TCAD Simulation of Stitching for Passive CMOS Strip Detectors

Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are ver...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Hauptverfasser: Baselga, Marta, Arling, Jan Hendrik, Davis, Naomi, Dingfelder, Jochen, Gregor, Ingrid-Maria, Hauser, Marc, Huegging, Fabian, Jakobs, Karl, Karagounis, Michael, Koppenhoefer, Roland, Kroeninger, Kevin, Lex, Fabian, Parzefall, Ulrich, Sari, Birkan, Spannagel, Simon, Sperlich, Dennis, Weingarten, Jens, Zatocilova, Iveta
Format: Artikel
Sprache:eng
Schlagworte:
Online-Zugang:Volltext bestellen
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
container_end_page
container_issue
container_start_page
container_title
container_volume
creator Baselga, Marta
Arling, Jan Hendrik
Davis, Naomi
Dingfelder, Jochen
Gregor, Ingrid-Maria
Hauser, Marc
Huegging, Fabian
Jakobs, Karl
Karagounis, Michael
Koppenhoefer, Roland
Kroeninger, Kevin
Lex, Fabian
Parzefall, Ulrich
Sari, Birkan
Spannagel, Simon
Sperlich, Dennis
Weingarten, Jens
Zatocilova, Iveta
description Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are very useful to cover large areas for tracking purposes, while consuming less power per area compared to pixel sensors. The majority of particle physics experiments use conventional silicon strip detectors fabricated in foundries that do not use stitching, relying on a very small number of foundries worldwide that can provide large amounts of strip detectors. Fabricating strip detectors in a CMOS foundry opens the possibility to use more foundries and to include active elements in the strips for future productions. For the passive CMOS strip detectors project we fabricated strip detectors in a CMOS foundry using two 1 cm2 reticles that are stitched together along the wafer. The fabricated strips stitched the reticles three and five times, and it was shown that the performance of those strips is not affected by the stitching. This paper shows 3D TCAD simulations of the stitching area to investigate the possible effects stitching can have on the performance of the strip detectors, considering different stitching mismatches. We will show that the mismatch of stitched structures up to 1 um does not impact the performance with TCAD simulations which agrees with the results obtained from the measurements.
doi_str_mv 10.48550/arxiv.2409.17749
format Article
fullrecord <record><control><sourceid>arxiv_GOX</sourceid><recordid>TN_cdi_arxiv_primary_2409_17749</recordid><sourceformat>XML</sourceformat><sourcesystem>PC</sourcesystem><sourcerecordid>2409_17749</sourcerecordid><originalsourceid>FETCH-arxiv_primary_2409_177493</originalsourceid><addsrcrecordid>eNpjYJA0NNAzsTA1NdBPLKrILNMzMjGw1DM0Nzex5GSwDXF2dFEIzswtzUksyczPU8hPUwguySxJzsjMS1dIyy9SCEgsLs4sS1Vw9vUPBkoVZRYouKSWpCaX5BcV8zCwpiXmFKfyQmluBnk31xBnD12wRfEFRZm5iUWV8SAL48EWGhNWAQDNtjTI</addsrcrecordid><sourcetype>Open Access Repository</sourcetype><iscdi>true</iscdi><recordtype>article</recordtype></control><display><type>article</type><title>TCAD Simulation of Stitching for Passive CMOS Strip Detectors</title><source>arXiv.org</source><creator>Baselga, Marta ; Arling, Jan Hendrik ; Davis, Naomi ; Dingfelder, Jochen ; Gregor, Ingrid-Maria ; Hauser, Marc ; Huegging, Fabian ; Jakobs, Karl ; Karagounis, Michael ; Koppenhoefer, Roland ; Kroeninger, Kevin ; Lex, Fabian ; Parzefall, Ulrich ; Sari, Birkan ; Spannagel, Simon ; Sperlich, Dennis ; Weingarten, Jens ; Zatocilova, Iveta</creator><creatorcontrib>Baselga, Marta ; Arling, Jan Hendrik ; Davis, Naomi ; Dingfelder, Jochen ; Gregor, Ingrid-Maria ; Hauser, Marc ; Huegging, Fabian ; Jakobs, Karl ; Karagounis, Michael ; Koppenhoefer, Roland ; Kroeninger, Kevin ; Lex, Fabian ; Parzefall, Ulrich ; Sari, Birkan ; Spannagel, Simon ; Sperlich, Dennis ; Weingarten, Jens ; Zatocilova, Iveta</creatorcontrib><description>Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are very useful to cover large areas for tracking purposes, while consuming less power per area compared to pixel sensors. The majority of particle physics experiments use conventional silicon strip detectors fabricated in foundries that do not use stitching, relying on a very small number of foundries worldwide that can provide large amounts of strip detectors. Fabricating strip detectors in a CMOS foundry opens the possibility to use more foundries and to include active elements in the strips for future productions. For the passive CMOS strip detectors project we fabricated strip detectors in a CMOS foundry using two 1 cm2 reticles that are stitched together along the wafer. The fabricated strips stitched the reticles three and five times, and it was shown that the performance of those strips is not affected by the stitching. This paper shows 3D TCAD simulations of the stitching area to investigate the possible effects stitching can have on the performance of the strip detectors, considering different stitching mismatches. We will show that the mismatch of stitched structures up to 1 um does not impact the performance with TCAD simulations which agrees with the results obtained from the measurements.</description><identifier>DOI: 10.48550/arxiv.2409.17749</identifier><language>eng</language><subject>Physics - High Energy Physics - Experiment ; Physics - Instrumentation and Detectors</subject><creationdate>2024-09</creationdate><rights>http://creativecommons.org/licenses/by-nc-nd/4.0</rights><oa>free_for_read</oa><woscitedreferencessubscribed>false</woscitedreferencessubscribed></display><links><openurl>$$Topenurl_article</openurl><openurlfulltext>$$Topenurlfull_article</openurlfulltext><thumbnail>$$Tsyndetics_thumb_exl</thumbnail><link.rule.ids>228,230,780,885</link.rule.ids><linktorsrc>$$Uhttps://arxiv.org/abs/2409.17749$$EView_record_in_Cornell_University$$FView_record_in_$$GCornell_University$$Hfree_for_read</linktorsrc><backlink>$$Uhttps://doi.org/10.48550/arXiv.2409.17749$$DView paper in arXiv$$Hfree_for_read</backlink></links><search><creatorcontrib>Baselga, Marta</creatorcontrib><creatorcontrib>Arling, Jan Hendrik</creatorcontrib><creatorcontrib>Davis, Naomi</creatorcontrib><creatorcontrib>Dingfelder, Jochen</creatorcontrib><creatorcontrib>Gregor, Ingrid-Maria</creatorcontrib><creatorcontrib>Hauser, Marc</creatorcontrib><creatorcontrib>Huegging, Fabian</creatorcontrib><creatorcontrib>Jakobs, Karl</creatorcontrib><creatorcontrib>Karagounis, Michael</creatorcontrib><creatorcontrib>Koppenhoefer, Roland</creatorcontrib><creatorcontrib>Kroeninger, Kevin</creatorcontrib><creatorcontrib>Lex, Fabian</creatorcontrib><creatorcontrib>Parzefall, Ulrich</creatorcontrib><creatorcontrib>Sari, Birkan</creatorcontrib><creatorcontrib>Spannagel, Simon</creatorcontrib><creatorcontrib>Sperlich, Dennis</creatorcontrib><creatorcontrib>Weingarten, Jens</creatorcontrib><creatorcontrib>Zatocilova, Iveta</creatorcontrib><title>TCAD Simulation of Stitching for Passive CMOS Strip Detectors</title><description>Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are very useful to cover large areas for tracking purposes, while consuming less power per area compared to pixel sensors. The majority of particle physics experiments use conventional silicon strip detectors fabricated in foundries that do not use stitching, relying on a very small number of foundries worldwide that can provide large amounts of strip detectors. Fabricating strip detectors in a CMOS foundry opens the possibility to use more foundries and to include active elements in the strips for future productions. For the passive CMOS strip detectors project we fabricated strip detectors in a CMOS foundry using two 1 cm2 reticles that are stitched together along the wafer. The fabricated strips stitched the reticles three and five times, and it was shown that the performance of those strips is not affected by the stitching. This paper shows 3D TCAD simulations of the stitching area to investigate the possible effects stitching can have on the performance of the strip detectors, considering different stitching mismatches. We will show that the mismatch of stitched structures up to 1 um does not impact the performance with TCAD simulations which agrees with the results obtained from the measurements.</description><subject>Physics - High Energy Physics - Experiment</subject><subject>Physics - Instrumentation and Detectors</subject><fulltext>true</fulltext><rsrctype>article</rsrctype><creationdate>2024</creationdate><recordtype>article</recordtype><sourceid>GOX</sourceid><recordid>eNpjYJA0NNAzsTA1NdBPLKrILNMzMjGw1DM0Nzex5GSwDXF2dFEIzswtzUksyczPU8hPUwguySxJzsjMS1dIyy9SCEgsLs4sS1Vw9vUPBkoVZRYouKSWpCaX5BcV8zCwpiXmFKfyQmluBnk31xBnD12wRfEFRZm5iUWV8SAL48EWGhNWAQDNtjTI</recordid><startdate>20240926</startdate><enddate>20240926</enddate><creator>Baselga, Marta</creator><creator>Arling, Jan Hendrik</creator><creator>Davis, Naomi</creator><creator>Dingfelder, Jochen</creator><creator>Gregor, Ingrid-Maria</creator><creator>Hauser, Marc</creator><creator>Huegging, Fabian</creator><creator>Jakobs, Karl</creator><creator>Karagounis, Michael</creator><creator>Koppenhoefer, Roland</creator><creator>Kroeninger, Kevin</creator><creator>Lex, Fabian</creator><creator>Parzefall, Ulrich</creator><creator>Sari, Birkan</creator><creator>Spannagel, Simon</creator><creator>Sperlich, Dennis</creator><creator>Weingarten, Jens</creator><creator>Zatocilova, Iveta</creator><scope>GOX</scope></search><sort><creationdate>20240926</creationdate><title>TCAD Simulation of Stitching for Passive CMOS Strip Detectors</title><author>Baselga, Marta ; Arling, Jan Hendrik ; Davis, Naomi ; Dingfelder, Jochen ; Gregor, Ingrid-Maria ; Hauser, Marc ; Huegging, Fabian ; Jakobs, Karl ; Karagounis, Michael ; Koppenhoefer, Roland ; Kroeninger, Kevin ; Lex, Fabian ; Parzefall, Ulrich ; Sari, Birkan ; Spannagel, Simon ; Sperlich, Dennis ; Weingarten, Jens ; Zatocilova, Iveta</author></sort><facets><frbrtype>5</frbrtype><frbrgroupid>cdi_FETCH-arxiv_primary_2409_177493</frbrgroupid><rsrctype>articles</rsrctype><prefilter>articles</prefilter><language>eng</language><creationdate>2024</creationdate><topic>Physics - High Energy Physics - Experiment</topic><topic>Physics - Instrumentation and Detectors</topic><toplevel>online_resources</toplevel><creatorcontrib>Baselga, Marta</creatorcontrib><creatorcontrib>Arling, Jan Hendrik</creatorcontrib><creatorcontrib>Davis, Naomi</creatorcontrib><creatorcontrib>Dingfelder, Jochen</creatorcontrib><creatorcontrib>Gregor, Ingrid-Maria</creatorcontrib><creatorcontrib>Hauser, Marc</creatorcontrib><creatorcontrib>Huegging, Fabian</creatorcontrib><creatorcontrib>Jakobs, Karl</creatorcontrib><creatorcontrib>Karagounis, Michael</creatorcontrib><creatorcontrib>Koppenhoefer, Roland</creatorcontrib><creatorcontrib>Kroeninger, Kevin</creatorcontrib><creatorcontrib>Lex, Fabian</creatorcontrib><creatorcontrib>Parzefall, Ulrich</creatorcontrib><creatorcontrib>Sari, Birkan</creatorcontrib><creatorcontrib>Spannagel, Simon</creatorcontrib><creatorcontrib>Sperlich, Dennis</creatorcontrib><creatorcontrib>Weingarten, Jens</creatorcontrib><creatorcontrib>Zatocilova, Iveta</creatorcontrib><collection>arXiv.org</collection></facets><delivery><delcategory>Remote Search Resource</delcategory><fulltext>fulltext_linktorsrc</fulltext></delivery><addata><au>Baselga, Marta</au><au>Arling, Jan Hendrik</au><au>Davis, Naomi</au><au>Dingfelder, Jochen</au><au>Gregor, Ingrid-Maria</au><au>Hauser, Marc</au><au>Huegging, Fabian</au><au>Jakobs, Karl</au><au>Karagounis, Michael</au><au>Koppenhoefer, Roland</au><au>Kroeninger, Kevin</au><au>Lex, Fabian</au><au>Parzefall, Ulrich</au><au>Sari, Birkan</au><au>Spannagel, Simon</au><au>Sperlich, Dennis</au><au>Weingarten, Jens</au><au>Zatocilova, Iveta</au><format>journal</format><genre>article</genre><ristype>JOUR</ristype><atitle>TCAD Simulation of Stitching for Passive CMOS Strip Detectors</atitle><date>2024-09-26</date><risdate>2024</risdate><abstract>Most of the tracking detectors for high energy particle experiments are filled with silicon detectors since they are radiation hard, they can give very small spatial resolution and they can take advantage of the silicon electronics foundries developments and production lines. Strip detectors are very useful to cover large areas for tracking purposes, while consuming less power per area compared to pixel sensors. The majority of particle physics experiments use conventional silicon strip detectors fabricated in foundries that do not use stitching, relying on a very small number of foundries worldwide that can provide large amounts of strip detectors. Fabricating strip detectors in a CMOS foundry opens the possibility to use more foundries and to include active elements in the strips for future productions. For the passive CMOS strip detectors project we fabricated strip detectors in a CMOS foundry using two 1 cm2 reticles that are stitched together along the wafer. The fabricated strips stitched the reticles three and five times, and it was shown that the performance of those strips is not affected by the stitching. This paper shows 3D TCAD simulations of the stitching area to investigate the possible effects stitching can have on the performance of the strip detectors, considering different stitching mismatches. We will show that the mismatch of stitched structures up to 1 um does not impact the performance with TCAD simulations which agrees with the results obtained from the measurements.</abstract><doi>10.48550/arxiv.2409.17749</doi><oa>free_for_read</oa></addata></record>
fulltext fulltext_linktorsrc
identifier DOI: 10.48550/arxiv.2409.17749
ispartof
issn
language eng
recordid cdi_arxiv_primary_2409_17749
source arXiv.org
subjects Physics - High Energy Physics - Experiment
Physics - Instrumentation and Detectors
title TCAD Simulation of Stitching for Passive CMOS Strip Detectors
url https://sfx.bib-bvb.de/sfx_tum?ctx_ver=Z39.88-2004&ctx_enc=info:ofi/enc:UTF-8&ctx_tim=2024-12-25T18%3A08%3A48IST&url_ver=Z39.88-2004&url_ctx_fmt=infofi/fmt:kev:mtx:ctx&rfr_id=info:sid/primo.exlibrisgroup.com:primo3-Article-arxiv_GOX&rft_val_fmt=info:ofi/fmt:kev:mtx:journal&rft.genre=article&rft.atitle=TCAD%20Simulation%20of%20Stitching%20for%20Passive%20CMOS%20Strip%20Detectors&rft.au=Baselga,%20Marta&rft.date=2024-09-26&rft_id=info:doi/10.48550/arxiv.2409.17749&rft_dat=%3Carxiv_GOX%3E2409_17749%3C/arxiv_GOX%3E%3Curl%3E%3C/url%3E&disable_directlink=true&sfx.directlink=off&sfx.report_link=0&rft_id=info:oai/&rft_id=info:pmid/&rfr_iscdi=true